网友您好, 请在下方输入框内输入要搜索的题目:

题目内容 (请给出正确答案)

什么条件下,路由器的S0口状态是down的,但协议状态是up的().

  • A、S0口没有连接;
  • B、S0口有故障;
  • C、S0有连接,但用指令shutdown;
  • D、不存在这种情况

参考答案

更多 “什么条件下,路由器的S0口状态是down的,但协议状态是up的().A、S0口没有连接;B、S0口有故障;C、S0有连接,但用指令shutdown;D、不存在这种情况” 相关考题
考题 路由器上,命令“show int s0”的显示结果为:Serial0 is up,line protocol is down出现该结果的可能原因是()A.端口处于关闭状态B.物理端口被烧毁C.两端设备协议不一致D.路由表中无路由

考题 ● 路由器的S0 端口连接 (13) 。(13)A. 广域网 B. 以太网 C. 集线器 D. 交换机

考题 ACPI为PC机主机定义了6种不同的能耗状态(S0~S5),S0为正常工作状态。S1~S3为睡眠状态,S4为休眠状态, S5为【 】状态。

考题 为路由器1的s0口配置Internet协议属性参数。IP地址: (5);子网掩码: (6)。

考题 R1上执行show ip interface brief命令的输出中显示接口S0/0/0状态码为“up”和“down”,那么以下哪种情况可能属实A.接口当前配置了shutdown命令B.R1的串行接口两端协议不同C.R1的串行接口没有安装串行电缆D.两台路由器的串行链路,只有一端配置了IP地址

考题 R1上执行show ip interface brief命令的输出中显示接口S0/0/0状态码为“down”和“down”,那么以下哪种情况可能属实A.接口当前配置了shutdown命令B.R1的串行接口两端协议不同C.R1的串行接口没有安装串行电缆D.两台路由器的串行链路,只有一端配置了IP地址

考题 Examine the following configuration on Router R1. R1‘s show ip route 172.16.4.1 command list s a route with outgoing interface S0/1/1. Host 172.16.3.3 uses telnet to connect to host 172.16.4.1.What will Router R1 do with the packets generated by host 172.16.3.3 because of the telnet,assuming the packets enter R1‘s F0/0 interface?()interface Fastethernet 0/0ip address 172.16.1.1 255.255.255.0ip policy route - map Q2!route - map Q2 permitmatch ip address 101set interface s0/0/1!access - list 101 permit tcp host 172.16.3.3 172.16.4.0 0.0.0.255A. The packet will be forwarded out S0/0 /1, or not at all.B. The packet will be forwarded out S0/0/1 if it is up.C. The packet will be forwarded out S0/1/1 if it is up.D. The packet will be forwarded out S0/1/1 if it is up, or if it is not up, out s0/0/1.E. The packet will be forwarded o ut S0/0/1 if it is up, or if it is not up, out s0/1/1.

考题 Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of 10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1‘s configuration includes the command s router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in the command output, but not S0/2.Which answer gives the reason for the omission?()A. R1 has EIGRP neighbors reachable via S0/0 and S0/1, but not via S0/2, so it is not included.B. S0/2 may currently be in a state other than up/up.C. The network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being classful by default.D. S0/2 may be configured as a passive inter face.

考题 路由器的s0端口连接——。A.以太网B.交换机C.广域网D.网桥

考题 ●以太网交换机的Console端口连接 (36) ,Ethernet端口连接 (37) 。(36)A.广域网B.以太网卡C.计算机串口D.路由器S0口(37)A.广域网B.以太网卡C.计算机串口D.路由器S0口

考题 以太网交换机的Console端口连接 (1) ,Ethernet端口连接(2) 。A.广域网 B.以太网卡 C.计算机串口 D.路由器S0口

考题 以太网交换机的Console端口连接 () 。A.广域网 B.以太网卡 C.计算机串口 D.路由器S0口

考题 配置交换机时,以太网交换机的 Console 端口连接( )。A.广域网 B.以太网卡 C.计算机串口 D.路由器 S0 口

考题 在抛物线理论中,大小挠度的分界值是()。A、S0=0.1B、S0=0.04C、S0=0.08D、S0=1

考题 抛物线理论的无荷中挠系数,取值满足推荐值要求的是()。A、S0=0.1B、S0=0.04C、S0=0.08D、S0=1

考题 什么条件下,路由器的S0口状态是down的,但协议状态是up的()A、S0口没有连接B、S0口有故障C、S0有连接,但用指令shutdownD、不存在这种情况

考题 下列情况下,结论正确的是()A、当△H0,△S0时,反应自发;B、当△H0,△S0时,反应自发;C、当△H0,△S0时,低温非自发,高温自发;D、当△H0,△S0时,低温非自发,高温自发;E、当△H0,△S0时,任何温度下均不自发

考题 客户路由器S0/0接入帧中继网络,在路由器的接口上有如下显示信息: Serial1/1 current state: UP Line protocol current state: DOWN Internet Address is 3.3.3.2/24 接口的协议状态为DOWN,那么据此分析()A、接口可能封装了PPP协议B、物理链路可能有故障C、封装的LMI类型可能与远端不一致D、如果接口封装了帧中继协议,此时PVC的状态应该是DOWN

考题 Quidway2501路由器的哪些接口可以配置DDR()A、以太网口B、s0口C、s1口D、aux口

考题 有一个化学反应,在低温下可自发进行,随温度的升高,自发倾向降低,这反应是:()A、∆S0,∆H0B、∆S0,∆H0C、∆S0,∆H0D、∆S0,∆H0

考题 路由器配置广域网口s0/1,用到的命令是()。A、nets0/1B、linevtys0/1C、interf0/1D、inters0/1

考题 以路由器端口S0/1为例,0表示()。A、串口B、槽位C、端口D、网口

考题 单选题路由器配置广域网口s0/1,用到的命令是()。A nets0/1B linevtys0/1C interf0/1D inters0/1

考题 多选题Examine the following configuration on Router R1. R1's show ip route 172.16.4.1 command list s a route with outgoing interface S0/1/1. Host 172.16.3.3 uses telnet to connect to host 172.16.4.1.What will Router R1 do with the packets generated by host 172.16.3.3 because of the telnet,assuming the packets enter R1's F0/0 interface?() interface Fastethernet 0/0 ip address 172.16.1.1 255.255.255.0 ip policy route - map Q2 ! route - map Q2 permit match ip address 101 set interface s0/0/1 ! access - list 101 permit tcp host 172.16.3.3 172.16.4.0 0.0.0.255AThe packet will be forwarded out S0/0 /1, or not at all.BThe packet will be forwarded out S0/0/1 if it is up.CThe packet will be forwarded out S0/1/1 if it is up.DThe packet will be forwarded out S0/1/1 if it is up, or if it is not up, out s0/0/1.EThe packet will be forwarded o ut S0/0/1 if it is up, or if it is not up, out s0/1/1.

考题 单选题Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of 10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1's configuration includes the command s router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in the command output, but not S0/2. Which answer gives the reason for the omission?()A R1 has EIGRP neighbors reachable via S0/0 and S0/1, but not via S0/2, so it is not included.B S0/2 may currently be in a state other than up/up.C The network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being classful by default.D S0/2 may be configured as a passive inter face.

考题 单选题下列情况下,结论正确的是()。A 当ΔH0,ΔS0时,反应自发B 当ΔH0,ΔS0时,反应自发C 当ΔH0,ΔS0时,低温非自发,高温自发D 当ΔH0,ΔS0时,低温非自发,高温自发;

考题 单选题以路由器端口S0/1为例,0表示()。A 串口B 槽位C 端口D 网口