网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
单选题
An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）
A
The BIOS is set with the wrong boot order.
B
The jumpers have not been set on the hard drive.
C
The hard drive is not compatible with the system board.
D
The boot.ini file needs to be modified.
参考答案
参考解析
解析：
暂无解析
更多 “单选题An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A The BIOS is set with the wrong boot order.B The jumpers have not been set on the hard drive.C The hard drive is not compatible with the system board.D The boot.ini file needs to be modified.” 相关考题
考题
Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?()
A. Format the partitionB. Load any RAID or SATA drivers neededC. Partition the driveD. Configure Windows settings
考题
Which of the following internal storage media types has the GREATEST storage capacity?()
A. Compact flash driveB. SATA hard driveC. Blu-Ray driveD. SDLT Tape drive
考题
A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A、Use a jumper from the motherboard where the new drive is going to be installed.B、Use a jumper from a hard drive that is no longer functioning.C、Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.D、The new hard drive must be replaced
考题
An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）A、The hard drives were not plugged into the server correctly.B、The controller driver is outdated and needs to be updated from the OEMs website.C、The firmware for the server is too old and does not support the new RAID controller card.D、The cable from the controller to the hard drive backplane is not connected.
考题
Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?（）A、Format the partitionB、Load any RAID or SATA drivers neededC、Partition the driveD、Configure Windows settings
考题
An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）A、SATA to SCSIB、SATA to HBAC、SATA to USBD、SATA to SAS
考题
After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）A、Install a larger fan near the hard drive to cool the system.B、Clean the drive with compressed air and continue to use it.C、Remove and replace the drive.D、Apply more thermal compound and reseat the drive.
考题
Which of the following will occur if a laptop SATA 1 drive is installed on a SATA 2 controller?（）A、The drive will run at the lower SATA 1 speed.B、The drive will not work due to incompatibility.C、The drive will run at the higher SATA 2 speed.D、The drive will have intermittent POST errors.
考题
A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer. Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）A、Add another hard drive and use that available space.B、Run FDISK.C、Use the Disk Management tool.D、Back up all important data to an external drive then reformat the hard drive.
考题
Which of the following is eliminated when using SATA instead of PATA technology？（）A、Jumper selectionB、Power connectorC、Data port connectorD、Hard drive LEDs
考题
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）A、Disk ManagementB、Services and ApplicationsC、Removable StorageD、Device Manager
考题
An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance. The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）A、Move the page file to the new drive.B、Copy the system32 directory to the new drive.C、Convert the C drive to a basic disk.D、Setup a software RAID to mirror the C drive.
考题
Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）A、The new drive’s jumper is set for master.B、The new drive is connected to the secondary bus as a slave drive.C、Both drives’ jumpers are set for cable select.D、The old drive’s jumper is set for master and the new drive is set for slave.
考题
An administrator is configuring RAID 1 in a server. The administrator has been given two matching 80GB SATA-2 hard drives， two SATA-2 cables， and a SATA-2 RAID adapter. How should the administrator BEST configure these drives？（）A、Install one drive on the first channel and install the second drive on the second channel.B、Install one drive on the first cable， on the first channel. Install the second drive on the secondcable， on the second channel.C、Install both drives on the same channel. Cable both drives as the primary master on the samecable.D、Install both drives on the same channel. On the same cable one drive should be set as primaryslave and the other drive as the primary master.
考题
The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.
考题
An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A、The BIOS is set with the wrong boot order.B、The jumpers have not been set on the hard drive.C、The hard drive is not compatible with the system board.D、The boot.ini file needs to be modified.
考题
Which of the following internal storage media types has the GREATEST storage capacity?（）A、Compact flash driveB、SATA hard driveC、Blu-Ray driveD、SDLT Tape drive
考题
A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）A、Windows cannot be booted from a controller card.B、The hard drive must have Windows reinstalled because a new controller card was installed.C、The SATA controller card was not set as a boot device in the computer BIOS.D、The new controller must have the correct jumper settings for Windows mode.
考题
单选题Which of the following internal storage media types has the GREATEST storage capacity？（）A
Compact flash driveB
SATA hard driveC
Blu-Ray driveD
SDLT Tape drive
考题
单选题Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）A
The new drive’s jumper is set for master.B
The new drive is connected to the secondary bus as a slave drive.C
Both drives’ jumpers are set for cable select.D
The old drive’s jumper is set for master and the new drive is set for slave.
考题
单选题An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system. Which of the following is the MOST probable cause？（）A
The BIOS is set with the wrong boot order.B
The jumpers have not been set on the hard drive.C
The hard drive is not compatible with the system board.D
The boot.ini file needs to be modified.
考题
单选题An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）A
SATA to SCSIB
SATA to HBAC
SATA to USBD
SATA to SAS
考题
单选题The customer brings their mini-tower and a new DVD/RW drive they want installed. The technician finds a second hard drive in an empty 5.25 bay connected to the secondary bus and jumpered as a slave. The ribbon cable will not stretch from the primary hard drive to the open 5.25 inch bay. Which of the following is the BEST solution?（）A
Connect the new DVD drive as the primary on the secondary bus and leave the old CD drive disconnected.B
Move the secondary hard drive next to the primary hard drive and connect to the primary bus. Connect the new DVD drive as the slave on the secondary bus.C
Move the secondary hard drive from the secondary to the primary bus and then reformat the hard drive after rebooting then reassign the drive letters in disk management prior to installing the new DVD drive on the secondary bus.D
Move the secondary hard drive to the bay and then connect it to the primary bus. Connect themini-tower and the new DVD drive as the master on the secondary bus.
考题
单选题A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）A
Use a jumper from the motherboard where the new drive is going to be installed.B
Use a jumper from a hard drive that is no longer functioning.C
Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.D
The new hard drive must be replaced
考题
单选题An internal user has deleted a file named， pagefile.sys and is concerned this deletion may affect the computer. The user should be instructed to：（）A
reboot the computer because Windows automatically generates a new page file.B
add a new hard drive， format the drive and install Windows.C
back up all data， reboot the computer and notify a desktop technician.D
reformat the hard drive and reinstall Windows.
考题
单选题Which of the following will occur if a laptop SATA 1 drive is installed on a SATA 2 controller?（）A
The drive will run at the lower SATA 1 speed.B
The drive will not work due to incompatibility.C
The drive will run at the higher SATA 2 speed.D
The drive will have intermittent POST errors.
考题
单选题A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）A
Have the client purchase a SATA compatible system board.B
Have the client purchase a SATA to IDE conversion kit.C
Have the client return the drive and purchase an IDE compatible drive.D
Have the client purchase a SCSI to SATA conversion kit.
考题
单选题An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem？（）A
The hard drives were not plugged into the server correctly.B
The controller driver is outdated and needs to be updated from the OEMs website.C
The firmware for the server is too old and does not support the new RAID controller card.D
The cable from the controller to the hard drive backplane is not connected.
热门标签
最新试卷