单选题When should you enable Network Address Translation Transparency (NAT-T) on the Teleworker?（）A when a router between the Teleworker router and the head-end VPN router is doing NAT/pNAT and does not support IPSec pass-through B when the Teleworker router itself is doing NAT/pNATC alwaysD never

考题 A router that performs Network Address Translation (NAT) is installed between your computer and the Internet.The router fails. You connect the computer directly to the Internet.You need to ensure that the computer is connected to the Internet in the most secure manner possible.What should you do?（）A.AB.BC.CD.D

查看答案

考题 What parameters must you specify when you enable EIGRP routing?() A. The broadcast address, and AS numberB. The network number and AS numberC. EIGRP routing, network number and passive interfaceD. EIGRP routing, network number, and AS

查看答案

考题 When should you enable Network Address Translation Transparency (NAT-T) on the Teleworker?（）A、when a router between the Teleworker router and the head-end VPN router is doing NAT/pNAT and does not support IPSec pass-through B、when the Teleworker router itself is doing NAT/pNATC、alwaysD、never

查看答案

考题 What parameters must you specify when you enable EIGRP routing?（）A、The broadcast address, and AS numberB、The network number and AS numberC、EIGRP routing, network number and passive interfaceD、EIGRP routing, network number, and AS

查看答案

考题 You work as an administrator at ABC.com.The ABC.com network consists of a single domain named ABC.com.All servers in the ABC.com domain， including domain controllers， have Windows Server 2012 R2 installed.The ABC.com network has a server named ABC_SR09 that hosts two virtual machines.How would you enable Network Load Balancing （NLB） on the virtual machines？（）A、You should configure Router Guard on the two virtual machines.B、You should configure Port Mirroring on the two virtual machines.C、You should add the Network Load Balancing feature on the two virtual machines.D、You should configure Integration Services on ABC_SR09.E、You should configure NIC Teaming on the two virtual machines.F、You should enable spoofing of MAC Address on the two virtual machines.

查看答案

考题 You are an administrator of a small business network. You have one dial-up account at an ISP and want all computers on your network connect to the Internet. You have enabled Internet connection sharing. You do not want to initiate this connection automatically when a request for Internet reaches your computer. What should you do? （）A、You should uncheck “Enable on demand dialingB、Enable on-demand dialingC、Enable sharing a modem on one computer on the networkD、Configure a DHCP ServerE、Disable Internet Connection Sharing

查看答案

考题 When implementing 802.1X on Teleworker routers and using separate DHCP address pools for Teleworker and Home-user devices, traffic between devices can be restricted. How can you best accomplish this?（）A、Access Lists between the inside interface and loopback interfaceB、Context Based Access ControlC、Dynamic Host Configuration ProtocolD、Network Address translation

查看答案

考题 Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）A、The bindings.B、A DNS address.C、A Gateway address.D、A WINS server address.E、A DHCP server address.

查看答案

考题 You connect your computer to a wireless network. You discover that this new connection fails to show in the Connect to a network window. You need to view this connection in the Connect to a network window. What should you do？（）A、Click the Diagnose and repair link.B、Enable the Turn on notification of new networks option.C、Configure the Connect to a network window to show all networks.D、Disable the Connect automatically when this network is in range option， and then enable the Connect even if the network is not broadcasting option.

查看答案

考题 You are the administrator of ExamSheet.net's network. ExamSheet upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings so that IP and DNS addresses are obtained automatically. When you restart the computer you cannot access the network. When you attempt toPINGaddress 127.0.0.1 you receive the following error message: "Request timed out." You want this computer to communicate on the network. What should you do?（）A、Configure IP address settings manually.B、Replace the network adapter.C、Disable TCP/IP filtering for all network adapters.D、Configure DNS server address settings manually.E、Enable IEEE 802.1x authentication.

查看答案

考题 You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.

查看答案

考题 our network consists of a single Active Directory domain. All network servers run Windows Server 2003 Service Pack 2 (SP2). The network contains a single subnet. The network connects to the Internet by using a network address translation (NAT) device. You deploy a new DHCP server named Server1. You create a scope as shown in the exhibit. (Click the Exhibit button.) You need to ensure that client computers can connect to the Internet. What should you do?（）A、Add a Router scope option. B、Enable conflict detection on the DHCP server. C、Remove the WINS/NBT Node Type scope option. D、Configure the scope to respond to a BOOTP request only.

查看答案

考题 A router that performs Network Address Translation （NAT） is installed between your computer and the Internet. The router fails. You connect the computer directly to the Internet. You need to ensure that the computer is connected to the Internet in the most secure manner possible. What should you do？（）A、Enable the Remote Desktop feature in the System Properties dialog box.B、Configure the network category of your network connection to Public.C、Configure the network category of your network connection to Private.D、Enable the Windows Collaboration Computer Name Registration Service exception in Microsoft Windows Firewall.

查看答案

考题 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the Remote Access Service role service installed. Server1 is configured as a VPN server.You need to ensure that you can configure Server1 as a Network Address Translation (NAT) server.What should you do first on Server1？（）A、Enable IPv4 routing.B、Enable IPv6 routing.C、Add a new routing protocol.D、Add the Routing role service.

查看答案

考题 Your network contains a server named Server1 that has the Routing role service installed. Server1 has two network connections. One network connection connects to the internal network. The other network connection connects to the Internet.All network connections connected to the internal network use private IP addresses. You install a Web server named Web1. Web1 hosts a secured Web site that only allows connections over TCP port 8281. Web1 is connected to the internal network.You need to ensure that the secure Web site can be accessed from the Internet.What should you do from the Routing and Remote Access console？（）A、Configure Routing Information Protocol (RIP), and then activate authentication on the RIP interface.B、Configure Routing Information Protocol (RIP), and then configure the incoming packet protocol settings on the RIP interface.C、Configure Network Address Translation (NAT), and then add a new service to the NAT interface.D、Configure Network Address Translation (NAT), and then enable the Secure Web Server (HTTPS) service on the NAT interface.

查看答案

考题 You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server is configured as a network address translation (NAT) router. The server has two network adapters and provides Internet access for the network.You need to prevent traffic on port 21 from being sent to the Internet. All other outbound traffic must be allowed.What should you do?（） A、On the network adapter that is connected to the LAN, enable TCP/IP filtering. B、On the network adapter that is connected to the Internet, enable TCP/IP filtering. C、From the Routing and Remote Access snap-in, open the properties of the interface connected to the Internet, select the Services and Ports tab, and define a new service. D、From the Routing and Remote Access snap-in, open the properties of the interface connected to the Internet, select the NAT/Basic Firewall tab, and define a new static packet filter.

查看答案

考题 Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）A、Configure a different TCP/IP addressB、Enable DHCP in the TCP/IP propertiesC、Enable DNS in the TCP/IP propertiesD、Configure the network adapter to run at 100 Mbps onlyE、Replace the network adapter.

查看答案

考题 You want to configure your Windows 2000 Professional computer to remotely access your company’s Windows 2000 routing and remote access server. You configure a VPN connection. For security purposes， you configure the VPN connection to use MS-CHAP v2 only and to require encryption. You also configure TCP/IP to obtain an IP address automatically， to enable IPSec， and to set IPSec to secure server. When you try to connect， you receive the following error message， “The encryption attempt failed because no valid certificate was found.” What should you do to connect to the server？（）A、Enable the VPN connection to use MS-CHAP.B、Change the data encryption setting to Optional Encryption.C、Specify a TCP/IP address in the network properties.D、Change the IPSec policy setting to Client.

查看答案

考题单选题What parameters must you specify when you enable EIGRP routing?（）A The broadcast address, and AS numberB The network number and AS numberC EIGRP routing, network number and passive interfaceD EIGRP routing, network number, and AS

查看答案

考题多选题Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）AThe bindings.BA DNS address.CA Gateway address.DA WINS server address.EA DHCP server address.

查看答案

考题单选题You are the administrator of ExamSheet.net's network. ExamSheet upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings so that IP and DNS addresses are obtained automatically. When you restart the computer you cannot access the network. When you attempt toPINGaddress 127.0.0.1 you receive the following error message: "Request timed out." You want this computer to communicate on the network. What should you do?（）A Configure IP address settings manually.B Replace the network adapter.C Disable TCP/IP filtering for all network adapters.D Configure DNS server address settings manually.E Enable IEEE 802.1x authentication.

查看答案

考题单选题A router that performs Network Address Translation （NAT） is installed between your computer and the Internet. The router fails. You connect the computer directly to the Internet. You need to ensure that the computer is connected to the Internet in the most secure manner possible. What should you do？（）A Enable the Remote Desktop feature in the System Properties dialog box.B Configure the network category of your network connection to Public.C Configure the network category of your network connection to Private.D Enable the Windows Collaboration Computer Name Registration Service exception in Microsoft Windows Firewall.

查看答案

考题单选题You use a Windows 2000 Professional desktop computer. The corporate product information is stored on this computer. You want other users on the network to be able to read the product information on your computer. You use Windows Explorer to share the product information folder on the network. You want Sales staff to be able to keep a copy of the product information on their portable computers when they travel. Other users should not be able to synchronize the product information. What should you do?（）A Use Synchronization manager to configure synchronization to occur when users are connected to the LAN connection.B Use Windows Explorer to grant Sales Staff Special access for the reports on the network share.C Use Windows Explorer to enable automatic caching for documents on the network share.D Create a new share for the Sales users only and enable caching on that share only.

查看答案

考题单选题You connect your computer to a wireless network. You discover that this new connection fails to show in the Connect to a network window. You need to view this connection in the Connect to a network window. What should you do？（）A Click the Diagnose and repair link.B Enable the Turn on notification of new networks option.C Configure the Connect to a network window to show all networks.D Disable the Connect automatically when this network is in range option， and then enable the Connect even if the network is not broadcasting option.

查看答案

考题多选题You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）AConfigure a HOSTS file.BConfigure a LMHOSTS file.CConfigure a WINS server database.DConfigure a DHCP server address.EConfigure at least one DNS address.

查看答案

考题单选题Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. You create a new inbound rule by using Windows Firewall with Advanced Security. You need to configure the rule to allow Server1 to accept unsolicited inbound packets that are received through a network address translation （NAT） device on the network. Which setting in the rule should you configure？（）A Edge traversalB Authorized computersC Interface typesD Remote IP address

查看答案

考题单选题You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A Enable DHCP in the TCP/IP properties.B Replace the Token Ring network adapter with an Ethernet network adapter.C Configure a different TCP/IP address on the same subnet.D Configure a valid DNS Server in the TCP/IP properties.

查看答案

考题单选题When should you enable Network Address Translation Transparency (NAT-T) on the Teleworker?（）A when a router between the Teleworker router and the head-end VPN router is doing NAT/pNAT and does not support IPSec pass-through B when the Teleworker router itself is doing NAT/pNATC alwaysD never

查看答案

网友您好， 请在下方输入框内输入要搜索的题目：

网友您好，请在下方输入框内输入要搜索的题目：