Which command is needed to change this policy to a tunnel policy for a policy-based VPN？（） [edit security policies from-zone trust to-zone untrust] user@host# show policy tunnel-traffic { match { source-address local-net； destination-address remote-net； application any； then { permit； } }A、set policy tunnel-traffic then tunnel remote-vpnB、set policy tunnel-traffic then permit tunnel remote-vpnC、set policy tunnel-traffic then tunnel ipsec-vpn remote-vpn permitD、set policy tunnel-traffic then permit tunnel ipsec-vpn remote-vpn

考题 Click the Exhibit button.Referring to the exhibit, which statement contains the correct gateway parameters?() A. [edit security ike] user@host# show gateway ike-phase1-gateway { policy ike-policy1; address 10.10.10.1; dead-peer-detection { interval 20; threshold 5; } external-interface ge-1/0/1.0; }B. [edit security ike] user@host# show gateway ike-phase1-gateway { ike-policy ike-policy1; address 10.10.10.1; dead-peer-detection { interval 20; threshold 5; } external-interface ge-1/0/1.0; }C. [edit security ike] user@host# show gateway ike-phase1-gateway { policy ike1-policy; address 10.10.10.1; dead-peer-detection { interval 20; threshold 5; } external-interface ge-1/0/1.0; }D. [edit security ike] user@host# show gateway ike-phase1-gateway { ike-policy ike1-policy; address 10.10.10.1; dead-peer-detection { interval 20; threshold 5; } external-interface ge-1/0/1.0; }

查看答案

考题 Click the Exhibit button.A network administrator receives complaints that the application voicecube is timing out after being idle for 30 minutes.Referring to the exhibit, what is a resolution?() A. [edit] user@host# set applications application voicecube inactivity-timeout neverB. [edit] user@host# set applications application voicecube inactivity-timeout 2C. [edit] user@host# set applications application voicecube destination-port 5060D. [edit] user@host# set security policies from-zone trust to-zone trust policy intrazone then timeout never

查看答案

考题 Which two statements are true regarding the system－default security policy [edit security policies default－policy]?()(Choose two.) A. Traffic is permitted from the trust zone to the untrust zone.B. Intrazone traffic in the trust zone is permitted.C. All traffic through the device is denied.D. The policy is matched only when no other matching policies are found.

查看答案

考题 A network administrator wants to permit Telnet traffic initiated from the address book entry the10net in a zone called UNTRUST to the address book entry Server in a zone called TRUST.However, the administrator does not want the server to be able to initiate any type of traffic from the TRUST zone to the UNTRUST zone.Which configuration statement would correctly accomplish this task?（）A. from-zone UNTRUST to-zone TRUST { policy DenyServer { match { source-address any; destination-address any; application any; } then { deny; } } } from-zone TRUST to-zone UNTRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }B. from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then {deny; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }C. from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-ftp; } then { permit; } } }D. from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then { permit; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match {source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }

查看答案

考题 You have created a security policy on an SRX240 that permits traffic from any source-address, any destination-address, and any application. The policy will be a source IP policy for use with the Junos Pulse Access Control Service.What must you add to complete the security policy configuration?（）A. The intranet-auth authentication optionB. The redirect-portal application serviceC. The uac-policy application serviceD. The ipsec-vpn tunnel

查看答案

考题 Based on the configuration shown in the exhibit， what will happen to the traffic matching thesecurity policy？（） [edit schedulers] user@host# showscheduler now { monday all-day； tuesday exclude； wednesday { start-time 07：00：00 stop-time 18：00：00； } thursday { start-time 07：00：00 stop-time 18：00：00； } } [edit security policies from-zone Private to-zone External] user@host# showpolicy allowTransit { match { source-address PrivateHosts； destination-address ExtServers； application ExtApps； } then { permit { tunnel { ipsec-vpn myTunnel； } } } scheduler-name now； }A、The traffic is permitted through the myTunnel IPsec tunnel only on Tuesdays.B、The traffic is permitted through the myTunnel IPsec tunnel daily， with the exception of Mondays.C、The traffic is permitted through the myTunnel IPsec tunnel all day on Mondays and Wednesdays between 7：00 am and 6：00 pm， and Thursdays between 7：00 am and 6：00 pm.D、The traffic is permitted through the myTunnel IPsec tunnel all day on Mondays and Wednesdays between 6：01 pm and 6：59 am， and Thursdays between 6：01 pm and 6：59 am

查看答案

考题 Assume the default-policy has not been configured.Given the configuration shown in the exhibit， which two statements about traffic from host_a inthe HR zone to host_b in the trust zone are true？（） [edit security policies from-zone HR to-zone trust] user@host# show policy one { match { source-address any； destination-address any； application [ junos-http junos-ftp ]； } then { permit； } } policy two { match { source-address host_a； destination-address host_b； application [ junos-http junos-smtp ]； } then { deny； } }A、DNS traffic is denied.B、HTTP traffic is denied.C、FTP traffic is permitted.D、SMTP traffic is permitted.

查看答案

考题 Which two configuration elements are required for a policy-based VPN？（）A、IKE gatewayB、secure tunnel interfaceC、security policy to permit the IKE trafficD、security policy referencing the IPsec VPN tunnel

查看答案

考题 In the exhibit， you decided to change myHosts addresses. [edit security policies] user@host# show from-zone Private to-zone External { policy MyTraffic { match { source-address myHosts； destination-address ExtServers；application [ junos-ftp junos-bgp ]； } then { permit { tunnel { ipsec-vpn vpnTunnel； } } } } } policy-rematch； What will happen to the new sessions matching the policy and in-progress sessions that hadalready matched the policy？（）A、New sessions will be evaluated. In-progress sessions will be re-evaluated.B、New sessions will be evaluated. All in-progress sessions will continue.C、New sessions will be evaluated. All in-progress sessions will be dropped.D、New sessions will halt until all in-progress sessions are re-evaluated. In-progress sessions will be re-evaluated and possibly dropped.

查看答案

考题 You have created a security policy on an SRX240 that permits traffic from any source-address, any destination-address, and any application. The policy will be a source IP policy for use with the Junos Pulse Access Control Service. What must you add to complete the security policy configuration?（）A、The intranet-auth authentication optionB、The redirect-portal application serviceC、The uac-policy application serviceD、The ipsec-vpn tunnel

查看答案

考题 A network administrator wants to permit Telnet traffic initiated from the address book entry the10net in a zone called UNTRUST to the address book entry Server in a zone called TRUST. However, the administrator does not want the server to be able to initiate any type of traffic from the TRUST zone to the UNTRUST zone. Which configuration statement would correctly accomplish this task?（）A、from-zone UNTRUST to-zone TRUST { policy DenyServer { match { source-address any; destination-address any; application any; } then { deny; } } } from-zone TRUST to-zone UNTRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }B、from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then {deny; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }C、from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-ftp; } then { permit; } } }D、from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then { permit; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match {source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }

查看答案

考题 Which configuration shows the correct application of a security policy scheduler?（）A、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } scheduler-name now; } } }B、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }C、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn scheduler-name now; } } } }D、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; scheduler-name now; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }myTunnel;

查看答案

考题 Your task is to provision the Junos security platform to permit transit packets from the Private zone to the External zone by using an IPsec VPN and log information at the time of session close.Which configuration meets this requirement?（）A、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts;destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN; } } log { session-init; } } }B、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN; } } count { session-close; } } }C、[edit security policies from-zone Private to-zone External] user@host# showpolicy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN;} } log { session-close; } } }D、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN; log; count session-close; } } } }

查看答案

考题 Regarding a route-based versus policy-based IPsec VPN， which statement is true？（）A、A route-based VPN generally uses less resources than a policy-based VPN.B、A route-based VPN cannot have a deny action in a policy； a policy-based VPN can have a deny action.C、A route-based VPN is better suited for dialup or remote access compared to a policy-based VPN.D、A route-based VPN uses a policy referencing the IPsec VPN； a policy-based VPN policy does not use apolicy referencing the IPsec VPN

查看答案

考题 In the configuration shown in the exhibit， you decided to eliminate the junos-ftp applicationfrom the match condition of the policy MyTraffic. [edit security policies] user@hostl# show from-zone Private to-zone External { policy MyTraffic { match { source-address myHosts； destination-address ExtServers； application [ junos-ftp junos-bgp ]； } then { permit { tunnel { ipsec-vpn vpnTunnel； } } } } } policy-rematch； What will happen to the existing FTP and BGP sessions？（）A、The existing FTP and BGP sessions will continue.B、The existing FTP and BGP sessions will be re-evaluated and only FTP sessions will be dropped.C、The existing FTP and BGP sessions will be re-evaluated and all sessions will be dropped.D、The existing FTP sessions will continue and only the existing BGP sessions will be dropped.

查看答案

考题 Which two statements are true regarding the system-default security policy [edit security policies default-policy]?（）(Choose two.)A、Traffic is permitted from the trust zone to the untrust zone.B、Intrazone traffic in the trust zone is permitted.C、All traffic through the device is denied.D、The policy is matched only when no other matching policies are found.

查看答案

考题 Based on the configuration shown in the exhibit， what are the actions of the security policy？（） [edit schedulers] user@host# show scheduler now { monday all-day； tuesday exclude； wednesday { start-time 07：00：00 stop-time 18：00：00； } thursday { start-time 07：00：00 stop-time 18：00：00； } } [edit security policies from-zone Private to-zone External] user@host# showpolicy allowTransit { match { source-address PrivateHosts； destination-address ExtServers； application ExtApps；} then { permit { tunnel { ipsec-vpn myTunnel； } } } scheduler-name now；A、The policy will always permit transit packets and use the IPsec VPN myTunnel.B、The policy will permit transit packets only on Monday， and use the IPsec VPN Mytunnel.C、The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and Wednesday 7am to 6pm， and Thursday 7am to 6pm.D、The policy will always permit transit packets， but will only use the IPsec VPN myTunnel all day Monday and Wednesday 7am to 6pm， and Thursday 7am to 6pm.

查看答案

考题 Given the configuration shown in the exhibit， which statement is true about traffic from host_ato host_b？（） [edit security policies from-zone HR to-zone trust] user@host# showpolicy two { match { source-address subnet_a； destination-address host_b； application [ junos-telnet junos-ping ]； } then { reject； } } policy one { match { source-address host_a； destination-address subnet_b； application any； } then { permit； } } host_a is in subnet_a and host_b is in subnet_b.A、DNS traffic is denied.B、Telnet traffic is denied.C、SMTP traffic is denied.D、Ping traffic is permitted

查看答案

考题 You have configured a UTM profile called Block-Spam, which has the appropriate antispam configuration to block undesired spam e-mails.Which configuration would protect an SMTP server in the dmz zone from spam originating in the untrust zone?（）A、set security policies from-zone dmz to-zone untrust policy anti-spam then permit application- services utm-policy Block-SpamB、set security policies from-zone untrust to-zone dmz policy anti-spam then permit application- services utm-policy Block-SpamC、set security policies from-zone untrust to-zone dmz policy anti-spam then permit application- services anti-spam-policyD、set security policies from-zone untrust to-zone dmz policy anti-spam then permit application- services Block-Spam

查看答案

考题单选题In the configuration shown in the exhibit， you decided to eliminate the junos-ftp applicationfrom the match condition of the policy MyTraffic. [edit security policies] user@hostl# show from-zone Private to-zone External { policy MyTraffic { match { source-address myHosts； destination-address ExtServers； application [ junos-ftp junos-bgp ]； } then { permit { tunnel { ipsec-vpn vpnTunnel； } } } } } policy-rematch； What will happen to the existing FTP and BGP sessions？（）A The existing FTP and BGP sessions will continue.B The existing FTP and BGP sessions will be re-evaluated and only FTP sessions will be dropped.C The existing FTP and BGP sessions will be re-evaluated and all sessions will be dropped.D The existing FTP sessions will continue and only the existing BGP sessions will be dropped.

查看答案

考题多选题Assume the default-policy has not been configured.Given the configuration shown in the exhibit， which two statements about traffic from host_a inthe HR zone to host_b in the trust zone are true？（） [edit security policies from-zone HR to-zone trust] user@host# show policy one { match { source-address any； destination-address any； application [ junos-http junos-ftp ]； } then { permit； } } policy two { match { source-address host_a； destination-address host_b； application [ junos-http junos-smtp ]； } then { deny； } }ADNS traffic is denied.BHTTP traffic is denied.CFTP traffic is permitted.DSMTP traffic is permitted.

查看答案

考题单选题A network administrator wants to permit Telnet traffic initiated from the address book entry the10net in a zone called UNTRUST to the address book entry Server in a zone called TRUST. However, the administrator does not want the server to be able to initiate any type of traffic from the TRUST zone to the UNTRUST zone. Which configuration statement would correctly accomplish this task?（）A from-zone UNTRUST to-zone TRUST { policy DenyServer { match { source-address any; destination-address any; application any; } then { deny; } } } from-zone TRUST to-zone UNTRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }B from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then {deny; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }C from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-ftp; } then { permit; } } }D from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then { permit; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match {source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }

查看答案

考题单选题Which command is needed to change this policy to a tunnel policy for a policy-based VPN？（） [edit security policies from-zone trust to-zone untrust] user@host# show policy tunnel-traffic { match { source-address local-net； destination-address remote-net； application any； then { permit； } }A set policy tunnel-traffic then tunnel remote-vpnB set policy tunnel-traffic then permit tunnel remote-vpnC set policy tunnel-traffic then tunnel ipsec-vpn remote-vpn permitD set policy tunnel-traffic then permit tunnel ipsec-vpn remote-vpn

查看答案

考题多选题Which two configuration elements are required for a policy-based VPN？（）AIKE gatewayBsecure tunnel interfaceCsecurity policy to permit the IKE trafficDsecurity policy referencing the IPsec VPN tunnel

查看答案

考题单选题In the configuration shown in the exhibit， you decided to eliminate the junos-ftp applicationfrom the match condition of the policy MyTraffic. [edit security policies] user@hostl# show from-zone Private to-zone External { policy MyTraffic { match { source-address myHosts； destination-address ExtServers； application [ junos-ftp junos-bgp ]； } then { permit { tunnel { ipsec-vpn vpnTunnel； } } } } } policy-rematch； What will happen to the existing FTP and BGP sessions？（）A The existing FTP and BGP sessions will continue.B The existing FTP and BGP sessions will be re-evaluated and only FTP sessions will be dropped.C The existing FTP and BGP sessions will be re-evaluated and all sessions will be dropped.D The existing FTP sessions will continue and only the existing BGP sessions will be dropped.

查看答案

考题单选题In the exhibit， you decided to change myHosts addresses. [edit security policies] user@host# show from-zone Private to-zone External { policy MyTraffic { match { source-address myHosts； destination-address ExtServers；application [ junos-ftp junos-bgp ]； } then { permit { tunnel { ipsec-vpn vpnTunnel； } } } } } policy-rematch； What will happen to the new sessions matching the policy and in-progress sessions that hadalready matched the policy？（）A New sessions will be evaluated. In-progress sessions will be re-evaluated.B New sessions will be evaluated. All in-progress sessions will continue.C New sessions will be evaluated. All in-progress sessions will be dropped.D New sessions will halt until all in-progress sessions are re-evaluated. In-progress sessions will be re-evaluated and possibly dropped.

查看答案

考题单选题Based on the configuration shown in the exhibit， what are the actions of the security policy？（） [edit schedulers] user@host# show scheduler now { monday all-day； tuesday exclude； wednesday { start-time 07：00：00 stop-time 18：00：00； } thursday { start-time 07：00：00 stop-time 18：00：00； } } [edit security policies from-zone Private to-zone External] user@host# showpolicy allowTransit { match { source-address PrivateHosts； destination-address ExtServers； application ExtApps；} then { permit { tunnel { ipsec-vpn myTunnel； } } } scheduler-name now；A The policy will always permit transit packets and use the IPsec VPN myTunnel.B The policy will permit transit packets only on Monday， and use the IPsec VPN Mytunnel.C The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and Wednesday 7am to 6pm， and Thursday 7am to 6pm.D The policy will always permit transit packets， but will only use the IPsec VPN myTunnel all day Monday and Wednesday 7am to 6pm， and Thursday 7am to 6pm.

查看答案

网友您好， 请在下方输入框内输入要搜索的题目：

网友您好，请在下方输入框内输入要搜索的题目：