考题
CDP is being used throughout the Ezonexam network. What are two reasons why the Ezonexam network administrator would use CDP? (Choose two)A. To determine the status of network services on a remote deviceB. To obtain the IP Address of a connected device in order to telnet to the deviceC. To verify the type of cable interconnecting two devicesD. To verify Layer 2 connectivity between two devices when Layer 3 failsE. To obtain VLAN information from directly connected swticehsF. To determine the status of the routing protocols between directly connected routersG. To support automatic network failover during outages
考题
ABC Company has 1500 managed devices and 15,000 end users on a campus network. LAN Management Solution (LMS) is being deployed as the network management application. What is the recommended number of network management server(s)?()A.1B.2C.3D.4
考题
The network administrator of the Oregon router adds the follwing command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command?()
A. The command establishes a static routeB. The command invokes a dynamic routing protocol for 192.168.12.0C. Traffic for network 192.168.12.0 is forwarded to 172.16.12.1D. Traffic for all networks is forwarded to 172.16.12.1E. This route is automatically propagated throughout the entire networkF. Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network
考题
The network administrator of the Oregon router adds the follwing command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command?()A、The command establishes a static routeB、The command invokes a dynamic routing protocol for 192.168.12.0C、Traffic for network 192.168.12.0 is forwarded to 172.16.12.1D、Traffic for all networks is forwarded to 172.16.12.1E、This route is automatically propagated throughout the entire networkF、Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network
考题
You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?()A、STPB、GVRPC、SNMPD、VTPE、DHCP
考题
VOIP is being implemented on the Company network. In a properly designed network, what is the maximum amount of time a voice package should spend crossing a network? ()A、90 millisecondsB、120 millisecondsC、150 millisecondsD、240 milliseconds
考题
Which statement is true about TCN propagation?()A、The originator of the TCN immediately floods this information through the network.B、The TCN propagation is a two step process.C、A TCN is generated and sent to the root bridge.D、The root bridge must flood this information throughout the network.
考题
A company has a BGP network and a BGP route of 196.27.125.0/24 that should be propagated toall of the devices. The route is not now in any of the routing tables. The administrator determinesthat an access list is the cause of the problem. The administrator changes the access list to allowthis route, but the route still does not appear in any of the routing tables. What should be done topropagate this route?()A、Clear the BGP sessionB、Change both the inbound and outbound policy related to this routeC、Use the service-policy command to adjust the QOS policy to allow the route to propagateD、Use the release BGP routing command
考题
You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also, if the local OSPF route goes away, the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path?()A、static route needs to be addedB、floating static route needs to be addedC、bgp backdoor commandD、ospf backdoor command
考题
LDAP is being utilized throughout the Company Wireless network. Which issue or set of issues does the Lightweight Access Point Protocol (LWAPP) address? ()A、 Reduction of processing in wireless controllersB、 Distributed approach to authentication, encryption, and policy enforcementC、 Access point discovery, information exchange, and configurationD、 Provides security by blocking communication between access points and wireless clientsE、 None of the other alternatives apply.
考题
You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also,if the local OSPF route goes away,the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path?()A、static route needs to be addedB、floating static route needs to be addedC、bgp backdoor commandD、ospf backdoor command
考题
Router 1 is configured for BGP as dual-homed on the Cisco network. Which three BGP attributes are carried in every BGP update on this router (both IBGP and EBGP)?()A、originB、router-IDC、AS-pathD、local-preferenceE、next-hop
考题
Multicast is being deployed in the network, and only ip pim sparse-dense mode has been configured on all interfaces in the network to support a new video streaming application. No other multicast configuration was applied anywhere in the network. Since enabling multicast, the network monitoring tools show periodic spikes in link utilization throughout the network, even in areas where the video application is not being used. What could be a possible cause?()A、PIM sparse mode is being used.B、PIM dense mode is being used.C、The BGP multicast address family has not been configured.D、IGMP version 3 is being used.E、IP PIM neighbor filters have not been applied.
考题
As a Network Engineer, you decide to apply Cisco enterprise solution throughout the CIS network. What are the two advantages? ()(Choose two.)A、cost savingsB、product varietyC、well-tested interoperabilityD、regular upgrade process
考题
A technician needs to troubleshoot connectivity between two devices located on the same network. Which of the following BEST describes the type of protocol being used?()A、IGPB、EIGRPC、EGPD、BGP
考题
单选题Which statement is true about TCN propagation?()A
The originator of the TCN immediately floods this information through the network.B
The TCN propagation is a two step process.C
A TCN is generated and sent to the root bridge.D
The root bridge must flood this information throughout the network.
考题
单选题A company has a BGP network and a BGP route of 196.27.125.0/24 that should be propagated toall of the devices. The route is not now in any of the routing tables. The administrator determinesthat an access list is the cause of the problem. The administrator changes the access list to allowthis route, but the route still does not appear in any of the routing tables. What should be done topropagate this route?()A
Clear the BGP sessionB
Change both the inbound and outbound policy related to this routeC
Use the service-policy command to adjust the QOS policy to allow the route to propagateD
Use the release BGP routing command
考题
单选题You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?()A
STPB
GVRPC
SNMPD
VTPE
DHCP
考题
多选题The network administrator of the Oregon router adds the following command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command (Choose two.)()。AThe command establishes a static route.BThe command invokes a dynamic routing protocol for 192.168.12.0.CTraffic for network 192.168.12.0 is forwarded to 172.16.12.1.DTraffic for all networks is forwarded to 172.16.12.1.EThis route is automatically propagated throughout the entire network.FTrafficfor network 172.16.12.0 is forwarded to the 192.168.12.0 network.
考题
单选题A new asynchronous connection is being installed in your network. Which pair of WAN encapsulations types is suitable for asynchronous lines?()A
PPP and ATMB
PPP and SDLCC
ATM and HDLCD
SDLC and HDLC
考题
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also, if the local OSPF route goes away, the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path?()A
static route needs to be addedB
floating static route needs to be addedC
bgp backdoor commandD
ospf backdoor command
考题
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also,if the local OSPF route goes away,the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path?()A
static route needs to be addedB
floating static route needs to be addedC
bgp backdoor commandD
ospf backdoor command
考题
单选题LDAP is being utilized throughout the Company Wireless network. Which issue or set of issues does the Lightweight Access Point Protocol (LWAPP) address? ()A
Reduction of processing in wireless controllersB
Distributed approach to authentication, encryption, and policy enforcementC
Access point discovery, information exchange, and configurationD
Provides security by blocking communication between access points and wireless clientsE
None of the other alternatives apply.
考题
单选题VOIP is being implemented on the Company network. In a properly designed network, what is the maximum amount of time a voice package should spend crossing a network? ()A
90 millisecondsB
120 millisecondsC
150 millisecondsD
240 milliseconds
考题
多选题The Cisco AutoQoS feature is being used throughout the Company VOIP network. Which three statements about this feature are true?()AThe mls qos global configuration command must be entered before configuring AutoQoS.BCEF must be enabled.CThe no auto qos voip command is used to disable Cisco AutoQos and revoke all configurations generated by Cisco AutoQos.DCDP must be enabled.ESNMP must be enabled.
考题
单选题A technician needs to troubleshoot connectivity between two devices located on the same network. Which of the following BEST describes the type of protocol being used?()A
IGPB
EIGRPC
EGPD
BGP
考题
多选题Router 1 is configured for BGP as dual-homed on the Cisco network. Which three BGP attributes are carried in every BGP update on this router (both IBGP and EBGP)?()AoriginBrouter-IDCAS-pathDlocal-preferenceEnext-hop