网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
多选题
A technician is attempting to get into the BIOS and they are being prompted for a password. Which of the following can clear the BIOS password？（）
A
Pull the CMOS battery.
B
Pull the 20/24 pin connector from the main board.
C
Short the reset circuit near the RAM.
D
Use the appropriate jumper on main board.
E
Use the reset button on the front panel.
参考答案
参考解析
解析：
暂无解析
更多 “多选题A technician is attempting to get into the BIOS and they are being prompted for a password. Which of the following can clear the BIOS password？（）APull the CMOS battery.BPull the 20/24 pin connector from the main board.CShort the reset circuit near the RAM.DUse the appropriate jumper on main board.EUse the reset button on the front panel.” 相关考题
考题
A technician turns on a PC and before the computer boots up, the technician is prompted for apassword. The technician does not know the password. Which of the following can the techniciando to allow access to the PC?（） (Select TWO).A. Set the clear password jumper on the motherboardB. Enter the BIOS setup and select the clear password settingC. Remove the power cord from the power supply and then plug it back inD. Power cycle the PCE. Remove the CMOS battery for 15 minutes
考题
A technician would like to load an operating system CD on startup. Which of the following settings would a technician change in the BIOS?()
A. Enable TPMB. Enable BIOS passwordC. Disable TPMD. Boot sequence
考题
A technician turns on a PC and before the computer boots up, the technician is prompted for apassword. The technician does not know the password. Which of the following can the techniciando to allow access to the PC?（） (Select TWO).A、Set the clear password jumper on the motherboardB、Enter the BIOS setup and select the clear password settingC、Remove the power cord from the power supply and then plug it back inD、Power cycle the PCE、Remove the CMOS battery for 15 minutes
考题
A technician receives a boot error message OS not found. Which of the following should thetechnician check? （）A、The boot order in the BIOSB、If Plug and Play is enabledC、If the computer is in Safe ModeD、If the BIOS is current
考题
Which of the following safety procedures is the BEST when lifting heavy equipment onto a repairbench?（）A、The technician should always bend at the waist and lift with their arms.B、The technician should seek assistance from an available customer.C、The technician should always bend at the waist and lift with their back.D、The technician should get assistance from another technician.
考题
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）A、 backup the BIOS configuration to use laterB、 install the BIOS update from a command promptC、 create a bootable floppy and copy the BIOS update tools to the floppyD、 read the manufacturer’s guidelines and recommendations on installing the update
考题
In which of the following locations would a technician set the LBA mode for a hard drive？（）A、Jumper SettingsB、Disk ManagerC、Device ManagerD、System BIOS
考题
A technician is attempting to determine whether a CAT5 patch cord is a straight-through or acrossover. Which of the following is the BEST to use to determine the cord type?（）A、Cable testerB、Loopback cableC、MultimeterD、Extension magnet
考题
A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）A、Storage driver not loadedB、Fragmented hard driveC、Damaged or faulty NIC chipsetD、Damaged or faulty system boardE、Memory incompatible with the processorF、Missing voltage regulator
考题
A technician is dispatched to install additional RAM in a computer. The technician unplugs thesystem from the power source, and removes the cover of the PC. Which of the following shouldthe technician do NEXT?（）A、Update the BIOS for compatibility.B、Put on an ESD strap.C、Use an anti-static bag to hold the RAM while installing.D、Clean out the PC with compressed air.
考题
A technician has a PC that has no Internet connection. The IP address for the PC is 169.254.XXX.XXX. Which of the following should be checked FIRST?（）A、DHCP settingsB、BIOS settingsC、DNS settingsD、Power settings
考题
A technician arrives in Germany and discovers that when their PC is plugged into the outlet, nopower is received. Which of the following actions should the technician take to get the PC tooperate?（）A、Change the BIOS settings to the local timeB、Adjust the voltage selector switchC、Attach a 220 volt power strip from the current region to the PCD、Attach a 120 volt battery backup power supply to the PC
考题
A technician is installing a memory upgrade for a remote user. The technician notes that the machine is not reporting the correct amount of memory that was installed during the POST step. Which of the following actions should the technician perform FIRST?（）A、Replace the newly installed memory modules with another known-working unit.B、Remove and reseat the memory, and recheck the memory reported.C、Leave the configuration intact, and check cabling to ensure nothing was loose during the installation.D、Perform a BIOS upgrade on the machine.
考题
A technician has a laptop that is running slow and notices the fan is on high. Which of the following should the technician try FIRST?（）A、Clean the heatsink assembly of debris.B、Turn the fan off when the AC adapter is attached.C、Turn the fan to low in the BIOS.D、Replace the processor and fan.
考题
A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?（）A、Hard disk drive failureB、NTLDR file is missingC、BIOS is corruptedD、System board failure
考题
多选题A technician is attempting to get into the BIOS and they are being prompted for a password. Which of the following can clear the BIOS password？（）APull the CMOS battery.BPull the 20/24 pin connector from the main board.CShort the reset circuit near the RAM.DUse the appropriate jumper on main board.EUse the reset button on the front panel.
考题
单选题A technician is attempting to use a command line prompt to continuously ping a remote server to check availability and reliability of the connection. Which of the following provides the ping command needed to continuously ping the system?（）A
ping -aB
ping -fC
ping -rD
ping -t
考题
单选题A technician is attempting to configure Windows XP Media Center on a desktop from a CD. The message that comes up on the screen says ‘Missing NTLDR press any key to reboot’. Which of the following should the technician do NEXT?（）A
Replace the video card with a compatible one.B
Check the Windows XP Hardware Compatibility List.C
Verify the boot order in the BIOS.D
Install Windows XP RC2 first, then upgrade to Windows XP Media Center.
考题
单选题Which of the following safety procedures is the BEST when lifting heavy equipment onto a repairbench?（）A
The technician should always bend at the waist and lift with their arms.B
The technician should seek assistance from an available customer.C
The technician should always bend at the waist and lift with their back.D
The technician should get assistance from another technician.
考题
单选题While using the ping command to try and reach a local server, a technician receives a response of “Destination host unreachable”. After confirming that the PC is physically connected to the network, which of the following commands should the technician use to get more detailed information?（）A
TRACERTB
GREPC
TELNETD
DIG
考题
单选题A technician receives a boot error message OS not found. Which of the following should thetechnician check? （）A
The boot order in the BIOSB
If Plug and Play is enabledC
If the computer is in Safe ModeD
If the BIOS is current
考题
单选题Which of the following should a technician do FIRST in the BIOS to set up drive encryption?（）A
Enable eSATA supportB
Run built-in diagnosticsC
Enable TPMD
Enable virtualization support
考题
单选题A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）A
backup the BIOS configuration to use laterB
install the BIOS update from a command promptC
create a bootable floppy and copy the BIOS update tools to the floppyD
read the manufacturer’s guidelines and recommendations on installing the update
考题
单选题A technician would like to load an operating system CD on startup. Which of the following settings would a technician change in the BIOS?（）A
Enable TPMB
Enable BIOS passwordC
Disable TPMD
Boot sequence
考题
单选题A technician installs a CD-RW drive with a feature that enables the drive to write labels directly onto the disk. The computer will burn disks but will not write labels. Which of the following should the technician do NEXT?（）A
Reboot the computerB
Remove the drive and reinstallC
Install the device driverD
Flash the BIOS
考题
单选题An uninstalled program is still attempting to load when Windows starts. Which of the following options can the technician suggest to stop this unwanted program from loading?（）A
ServicesB
Add or Remove ProgramsC
System Configuration UtilityD
System File Checker
考题
多选题A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）AStorage driver not loadedBFragmented hard driveCDamaged or faulty NIC chipsetDDamaged or faulty system boardEMemory incompatible with the processorFMissing voltage regulator
考题
多选题A technician turns on a PC and before the computer boots up, the technician is prompted for apassword. The technician does not know the password. Which of the following can the techniciando to allow access to the PC?（） (Select TWO).ASet the clear password jumper on the motherboardBEnter the BIOS setup and select the clear password settingCRemove the power cord from the power supply and then plug it back inDPower cycle the PCERemove the CMOS battery for 15 minutes
热门标签
最新试卷