网友您好， 请在下方输入框内输入要搜索的题目：
题目内容
（请给出正确答案）
对于PE和CE同局址的情况，PE-CE之间建议使用（）模光纤互连。
参考答案
更多 “对于PE和CE同局址的情况，PE-CE之间建议使用（）模光纤互连。” 相关考题
考题
根据路由型MPLSVPN数据配置规范,一般可选择()方法实现PE－CE链路的负载分担。
A.路由策略主要由CE路由器控制，使用local-preference控制CE－PE方向的流量，MED控制PE-CE方向的流量B.路由策略主要由PE路由器控制，使用local-preference控制PE－CE方向的流量，MED控制CE-PE方向的流量C.路由策略主要由CE路由器控制，使用local-preference控制PE－CE方向的流量，MED控制CE-PE方向的流量D.路由策略主要由PE路由器控制，使用local-preference控制CE－PE方向的流量，MED控制PE-CE方向的流量
考题
城域网PE和CE之间的路由协议以下说法错误的是（）A、PE与客户端路由器CE之间可运行EBGP、Static以及RIPv2等多种路由协议，CE不需要支持MPLSB、采用EBGP协议与客户CE互联时，如客户没有AS号，建议使用私有的AS号，即使用64512~65535之间的AS号C、在客户端路由器CE能够具备EBGP互联的情况，优先使用EBGP实现PE-CE互联D、在客户端路由器CE和PE互联，优先使用OSPF路由协议
考题
用户接入路由型MPLS-VPN，PE－CE之间尽量避免采用ISIS等链路状态路由协议，请选择其中一个最合理理由（）A、PE－CE不需要实现快速路由收敛，没有必要允许状态路由协议B、PE性能扩展型的考虑C、状态路由协议对CE设备要求高D、状态路由协议容易受到安全攻击
考题
When implementing MPLS VPNs between CE and PE routers, which of these statements is correct? As a Network Engineer, it is necessary for you to know how to implement MPLS VPNs between Customer Edge and Provider Edge routers. Refer to the following descriptions, which one is making sense?（）A、If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistributionB、If using IS-IS as the PE-CE routing protocol, no redistribution is requiredC、If using static routes between the CE and PE routers, no redistribution of other VPN routes is requiredD、If PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required
考题
When BGP is used as the PE-CE routing protocol, which of these statements is correct?（）A、On the CE router, PE neighbors must be configured in the VRF context on the CE routerB、On PE routers, the CE IBGP neighbors are configured in the global BGP configurationC、On PE routers, the CE EBGP neighbors are configured in the VRF contextD、A separate BGP process must be used on the PE routers for CE routers so that they do not use the same BGP routing process as that used for the PE router's other provider neighbors
考题
PE与CE之间运行的路由协议，有下列哪些特殊要求（）。A、PE和CE之间必须运行动态路由协议，不能配置静态路由B、PE和CE之间运行的路由协议在PE上需要与对应的VPN进行绑定C、PE和CE之间如果运行OSPF路由协议，要求在PE上的OSPF进程号与CE上的OSPF进程号必须部署成相同D、PE和CE之间不能选择运行IBGP路由协议
考题
根据《QC-J-001-2012 中国移动EPC核心网工程设计规范》，考虑安全及异地容灾，同一局址设置的成对CE应与IP专用承载网的一对AR互连（两台AR设备布放在不同局址，AR可与CE同局址）。
考题
考虑到成对CE设备全部为同厂家设备，且同对CE设备之间互连不需经过传输，对于CE设备之间的链路配置原则，建议为（）A、CE间捆绑链路带宽总和应保证大于CE至AR上行链路带宽需求B、CE间捆绑链路带宽总和应保证小于CE至AR上行链路带宽需求C、CE间使用GE电接口/光接口互联，捆绑后的逻辑接口工作在二层方式D、CE间使用GE电接口/光接口互联，捆绑后的逻辑接口工作在三层方式
考题
中国移动IP承载网的网络地址主要包括：设备LOOPBACK地址、设备互连地址、网管地址、业务网段地址、PE-CE端口地址等，以下规划原则不正确的是（）A、设备LOOPBACK地址采用公有IP地址B、设备互连地址采用私有IP地址C、设备LOOPBACK地址采用私有IP地址D、设备LOOPBACK地址、设备互连地址、网管网段
考题
When implementing MPLS VPNs between CE and PE routers, which of these statements is correct? （）A、If using IS-IS as the PE-CE routing protocol, no redistribution is required.B、If using static routes between the CE and PE routers, no redistribution of other VPN routes is required.C、If the PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required.D、If RIP is the routing protocol that is used between the PE-CE routers, no redistribution is required, but any other protocol will require redistribution.E、If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistribution.
考题
单选题When EIGRP is used as the PE-CE routing protocol which of these statements is correct?（）A
EIGRP can be used only as the PE-CE routing protocol if the PE and CE routers are in the same ASB
Other EIGRP AS routes are automatically advertised to the CE router and do not require a redistribution configuration command to be configuredC
Unlike other routing protocols that are used between PE and CE routers, EIGRP supports backdoor linksD
Configure of the VPN is only required on the PE router
考题
单选题When BGP is used as the PE-CE routing protocol, which of these statements is correct?（）A
On the CE router, PE neighbors must be configured in the VRF context on the CE routerB
On PE routers, the CE IBGP neighbors are configured in the global BGP configurationC
On PE routers, the CE EBGP neighbors are configured in the VRF contextD
A separate BGP process must be used on the PE routers for CE routers so that they do not use the same BGP routing process as that used for the PE router's other provider neighbors
考题
单选题When implementing MPLS VPNs between CE and PE routers, which of these statements is correct? As a Network Engineer, it is necessary for you to know how to implement MPLS VPNs between Customer Edge and Provider Edge routers. Refer to the following descriptions, which one is making sense?（）A
If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistributionB
If using IS-IS as the PE-CE routing protocol, no redistribution is requiredC
If using static routes between the CE and PE routers, no redistribution of other VPN routes is requiredD
If PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required
考题
多选题根据路由型MPLSVPN数据配置规范，PE－CE之间使用哪些常用的路由协议。（）AOSPF路由协议BRIP路由协议C静态路由协议DBGP路由协议
热门标签
最新试卷