Two Company switches are connected via a trunk using VTP. Which VTP information does a Catalyst switch advertise on its trunk ports when using VTP？（）A、STP root statusB、VTP modeC、Negotiation statusD、Management domainE、Configuration revision number

考题 What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

查看答案

考题 A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

查看答案

考题 You need to configure two Ezonexam switches to exchange VLAN information. Which protocol provides a method of sharing VLAN configuration information between these two switches?A. STPB. 802.1QC. VLSMD. ISLE. VTPF. HSRPG. None of the above

查看答案

考题 Refer to the exhibit. You have a non-Cisco switch that is not communicating properly while connected to the distribution-layer Cisco switching fabric.Which two best-practice actions can you take to overcome this problem? （）(Choose two.)A. Turn off MST (802.1s) on all switches.B. Turn on MST (802.1s) on all switches.C. Turn on RSTP (802.1w) on all switches.D. Turn off RSTP (802.1w) on all switches.

查看答案

考题 What must an administrator do in order to successfully configure a VLAN trunk between two switches?() A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

查看答案

考题 To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus?() A. to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 linkB. to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 linkC. to two core switches from redundant distribution switches connected with a Layer 2 linkD. to two core switches from redundant distribution switches connected with a Layer 3 linkE. to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO

查看答案

考题 You need to investigate a VTP problem between two Company switches. The lack of which two prevents VTP information from propagating between switches？（）A、A root VTP serverB、A trunk portC、VTP priorityD、VLAN 1E、None of the other alternatives apply

查看答案

考题 To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus？（）A、 to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 linkB、 to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 linkC、 to two core switches from redundant distribution switches connected with Layer 2 linkD、 to two core switches from redundant distribution switches connected with Layer 3 linkE、 to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO

查看答案

考题 Cisco Small Business Switches are specifically engineered for the small business customer. What are two characteristics common to Cisco Small Business Switches？（）A、 remote managementB、 integrated telephonyC、 do-it-yourself installation and managementD、 experienced IT support requiredE、 single-site connectivity

查看答案

考题 Two Company switches are connected via a trunk link. In this network， the original frame is encapsulated and an additional header is added before the frame is carried over a trunk link. At the receiving end， the header is removed and the frame is forwarded to the assigned VLAN. This describes which technology？（）A、 DISLB、 ISLC、 DTPD、 IEEE 802.1QE、 MPLSF、 None of the other alternatives apply

查看答案

考题 A project requires a new server to be set up with the ability to automatically fail over its Ethernet connection to a second connection if a network failure occurs. Which of the following provides greatest resiliency？（）A、Two switch ports will be needed on a switch,two Ethernet cables will be needed for theserver each connecting to two different Ethernet cards,and one IP address will be neededB、Two switch ports will be needed on two different switches two Ethernet cables will beneeded for the server each connecting to two different Ethernet cards,and one IP address will be neededC、Two switch ports will be needed on two different switches,two Ethernet cables will be needed for the server each connecting to two different Ethernet cards,two different IP addresses will be neededD、One switch port will be needed on one switch,a splitter will be needed to split the connection,two Ethernet cables will be needed for the server each connecting to two different Ethernet cards,and two different IP addresses will be needed

查看答案

考题 Which two attributes need to match for two switches to become members of the same MST region？（）A、the table of 4096 elements that map the respective VLAN to STP instance numberB、VTP versionC、configuration revision numberD、native VLAN ID

查看答案

考题 An 802.1Q trunk is not coming up between two switches. The ports on both switches are configured as "switchport mode desirable." Assuming that there is no physical issue， choose two possible causes.（）A、Incorrect VTP domainB、Incorrect VTP passwordC、Incorrect VTP modeD、Incorrect VTP configuration revision

查看答案

考题 A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）A、You must set each end of the trunk line to IEEE 802.1e encapsulation.B、You must set the same VTP management domain name on both switches.C、You must set all ports on the two switches as access ports.D、You must configure one of the switches as a VTP server.E、You must use a rollover cable to connect the two switches.

查看答案

考题 Which of the following is required if ports from VLANs on two separate switches need to broadcastto each other?（）A、Port mirroringB、VPNC、TrunkingD、Port authentication

查看答案

考题 A project requires a new server to be set up with the ability to automatically fail over its Ethernet connection to a second connection if a network failure occurs. Which of the following provides greatest resiliency？（）A、Two switch ports will be needed on a switch， two Ethernet cables will be needed for the server each connecting to two different Ethernet cards， and one IP address will be needed.B、Two switch ports will be needed on two different switches， two Ethernet cables will be needed for the server each connecting to two different Ethernet cards， and one IP address will be needed.C、Two switch ports will be needed on two different switches， two Ethernet cables will be needed for the server each connecting to two different Ethernet cards， two different IP addresses will be needed.D、One switch port will be needed on one switch， a splitter will be needed to split the connection， two ethernet cables will be needed for the server each connecting to two different Ethernet cards， and two different IP addresses will be needed.

查看答案

考题单选题A project requires a new server to be set up with the ability to automatically fail over its Ethernet connection to a second connection if a network failure occurs. Which of the following provides greatest resiliency？（）A Two switch ports will be needed on a switch,two Ethernet cables will be needed for theserver each connecting to two different Ethernet cards,and one IP address will be neededB Two switch ports will be needed on two different switches two Ethernet cables will beneeded for the server each connecting to two different Ethernet cards,and one IP address will be neededC Two switch ports will be needed on two different switches,two Ethernet cables will be needed for the server each connecting to two different Ethernet cards,two different IP addresses will be neededD One switch port will be needed on one switch,a splitter will be needed to split the connection,two Ethernet cables will be needed for the server each connecting to two different Ethernet cards,and two different IP addresses will be needed

查看答案

考题单选题You need to connect two Company core switches via an ISL trunk. Which statement is true regarding the configuration of ISL trunks？（）A A Catalyst switch cannot have ISL and IEEE 802.1q trunks enabled.B All Catalyst switches support ISL trunking.C A Catalyst switch will report giants if one side is configured for ISL while the other side is not.D ISL trunking requires that native VLANs match.E None of the other alternatives apply

查看答案

考题多选题What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）ASet each end of the trunk line to IEEE 802.1Q encapsulation.BSet the same VTP management domain name on both switches.CSet all ports on the two switched as access ports.DConfigure one of the two switches as a VTP server.EConnect the two switches using a rollover cable.FUse a router to forward VTP traffic between the VLANs.

查看答案

考题多选题Cisco Small Business Switches are specifically engineered for the small business customer. What are two characteristics common to Cisco Small Business Switches？（）Aremote managementBintegrated telephonyCdo-it-yourself installation and managementDexperienced IT support requiredEsingle-site connectivity

查看答案

考题多选题Two Company switches are connected via a trunk using VTP. Which VTP information does a Catalyst switch advertise on its trunk ports when using VTP？（）ASTP root statusBVTP modeCNegotiation statusDManagement domainEConfiguration revision number

查看答案

考题多选题To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?（）AEach end of the trunk line must be set to IEEE 802.1E encapsulation.BThe VTP management domain name of both switches must be set the same.CAll ports on both the switches must be set as access ports.DOne of the two switches must be configured as a VTP server.EA rollover cable is required to connect the two switches together.FA router must be used to forward VTP traffic between VLANs.

查看答案

考题单选题A company needs to connect seven of their Windows-based servers to a DS4000 storage server. The DS4000 only has two host-side connections， and each server has two HBAs. Which of the following is the lowest cost solution to provide no single points of failure？（）A Implement two 8-port switches design with ISLsB Implement two 16-port switches design with ISLsC Implement two 8-port switches design without ISLsD Implement two 16-port switches design without ISLs

查看答案

考题单选题To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus？（）A to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 linkB to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 linkC to two core switches from redundant distribution switches connected with Layer 2 linkD to two core switches from redundant distribution switches connected with Layer 3 linkE to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO

查看答案

考题多选题You need to investigate a VTP problem between two Company switches. The lack of which two prevents VTP information from propagating between switches？（）AA root VTP serverBA trunk portCVTP priorityDVLAN 1ENone of the other alternatives apply

查看答案

考题单选题Two Company switches are connected via a trunk link. In this network， the original frame is encapsulated and an additional header is added before the frame is carried over a trunk link. At the receiving end， the header is removed and the frame is forwarded to the assigned VLAN. This describes which technology？（）A DISLB ISLC DTPD IEEE 802.1QE MPLSF None of the other alternatives apply

查看答案

网友您好，请在下方输入框内输入要搜索的题目：

更多 “Two Company switches are connected via a trunk using VTP. Which VTP information does a Catalyst switch advertise on its trunk ports when using VTP？（）A、STP root statusB、VTP modeC、Negotiation statusD、Management domainE、Configuration revision number” 相关考题

网友您好， 请在下方输入框内输入要搜索的题目：

更多 “Two Company switches are connected via a trunk using VTP. Which VTP information does a Catalyst switch advertise on its trunk ports when using VTP？（）A、STP root statusB、VTP modeC、Negotiation statusD、Management domainE、Configuration revision number” 相关考题

网友您好，请在下方输入框内输入要搜索的题目：