Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only whe nyou are traveling. You need to configure the network adapter profile settings to ensure that the computer discovers other network devices only when you are at home.Which two actions should you perform?（）A.AB.BC.CD.D

考题 Your computer uses both wired and wireless network connections. The networks are not connected to each other.You disallow incoming connections in Microsoft Windows Firewall. You create a shared folder. Users on the wireless network cannot access the shared folder. You need to allow access to the shared folder from the wireless network. You also need to maintain the security of the wired network.What should you do?（）A.AB.BC.CD.D

查看答案

考题 Your computer has a wireless network adapter installed. However, the computer fails to connect to the wireless network. You need to ensure that the computer is able to connect to the wireless network.What should you do?（）A.AB.BC.CD.D

查看答案

考题 Your wireless network is not listed in the Connect to a network window of your computer. You need to connect to your wireless network.Which two actions should you perform?() A.AB.BC.CD.DE.E

查看答案

考题 You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter.Your computer is able to access the Internet but is unable to discover other computers in the local wireless network.You need to configure the wireless connection to allow your computer to discover other computers.What should you do?（）A.AB.BC.CD.D

查看答案

考题 Your computer has a wireless network adapter installed. However， the computer fails to connect to the wireless network. You need to ensure that the computer is able to connect to the wireless network. What should you do？（）A、Change the Network Category setting of the wireless connection to Public.B、Enable the Internet Connection Sharing feature on the wireless network adapter.C、Rename the wireless network adapter to match the Service Set Identifier （SSID） of the wireless network.D、Configure the wireless network adapter to connect to the appropriate wireless network from the Connect to a network list.

查看答案

考题 You are the network administrator for passguide.com. Which device will you install in your computer to make wireless connections you and a network?（）A、RepeaterB、Wireless routerC、HubD、Wireless network adapter

查看答案

考题 You have a computer that runs Windows XP Professional. The computer has an 802. 11g wireless network card. You have a wireless access point that is secured by using WiFi Protected Access (WPA). The service set identifier (SSID) of the wireless access point does not broadcast. You need to establish a wireless connection to the wireless access point. What should you do?（） A、From the Device Manager, open the wireless network adapter properties and click Advanced. B、From the Device Manager, right-click the wireless network adapter and click Scan for hardware changes. C、From the Wireless Network Connection Properties, select View Wireless Networks. D、From the Wireless Network Connection Properties, click Change Advanced Settings. From the Wireless Networks tab, select Add a preferred network.

查看答案

考题 You are the network administrator for ExamSheet.net. You administer ExamSheet’s Windows 2000 network. You install Windows 2000 Professional on a computer that has a Non-Plug and Play video adapter. You want to configure the video adapter to use 32-bit color and 1024 x 768 resolution. The color setting for the video adapter is set to 16 colors and 640 x 480 resolutionand you cannot change either setting. You view display properties and confirm that the appropriate monitor is selected. You want to be able to change the color setting for this video adapter. What should you do？（）A、UseList All Modesto select the adapter default mode.B、Change the adapter refresh rate to 60Mhz.C、Upgrade the monitor drivers.D、Upgrade the display adapters drivers

查看答案

考题 You share your portable computer with a co-worker. You use separate user accounts to log on. A wireless network is available to you and your co-worker. You need to prevent your co-worker from modifying your wireless network profile. What should you do？（）A、Disable the Connect even if the network is not broadcasting option.B、In the Network and Sharing Center window， click the Diagnose and repair option.C、Set the default wireless profile type to the Use all-users only profile （recommended） option. Recreate the wireless network.D、Set the default wireless profile type to the Use all-users and per-user profiles option. Recreate the wireless network by using the Save this network for me only option.

查看答案

考题 Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only when traveling. You need to configure the network adapter profile settings to ensure that other systems are allowed to discover your computer only when you are at home. What are two possible ways to achieve this goal？（）A、When you configure access to the wired network at home， set the wired network adapter location type to Private.B、When you configure access to the wired network at home， set the wired network adapter location type to Public.C、When you configure access to the public wireless access points， set the wireless network adapter location type to Private.D、When you configure access to the public wireless access points， set the wireless network adapter location type to Public.

查看答案

考题 You share your computer with a co-worker by using separate user accounts to log on. Your co-worker modifies the wireless network properties. When you use the computer， the change in properties is not reflected. You need to ensure that you can view all the changes made to the wireless network properties. What should you do？（）A、Disable the Connect even if the network is not broadcasting option.B、In the Network and Sharing Center window， click the Diagnose and repair option.C、Set the default wireless profile type to the Use all-users only profile （recommended） option. Recreate the wireless network.D、Set the default wireless profile type to the Use all-users and per-user profiles option. Recreate the wireless network with the Save this network for me only option.

查看答案

考题 You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.

查看答案

考题 Your computer uses both wired and wireless network connections. The networks are not connected to each other. You disallow incoming connections in Microsoft Windows Firewall. You create a shared folder. Users on the wireless network cannot access the shared folder. You need to allow access to the shared folder from the wireless network. You also need to maintain the security of the wired network. What should you do？（）A、Turn off the Windows Firewall feature.B、Disable the Block all incoming connections option.C、Turn off the Spyware and other malware protection option.D、Enable the File and Printer Sharing exception in the firewall settings of the wireless network adapter.

查看答案

考题 You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.

查看答案

考题 Five of your company’s employees have Windows 2000 Professional portable computers. The employees use their portable computers in a network-enabled docking station when they are at their desks. When the employees are working outside of the office, they use the portable computers without network connectivity. You have just installed wireless PC Card network adapters in the portable computers so that the employees can access the network when they are in conference rooms in the office building. You need to configure the portable computers for optimum performance in all of the working environments. What should you do? （）A、Configure the wireless PC Card network adapters to use DHCP to obtain their IP addresses.B、Configure three different hardware profiles on each portable computer.C、Configure the wireless PC Card network adapters to use Automatic Private IP Addressing (APIPA） when they cannot detect a DHCP server.D、Instruct each employee to unplug the wireless PC Card network adapter whenever the portable computer is attached to a network-enabled.

查看答案

考题 You are the administrator of a small server based network. While installing Windows 2000 Professional on your computer, you configure the network adapter card for each computer to use TCP/IP and assign static IP setting information. During installation the setup detects and installs the 10/100 MBPS UTP only network adepter card on computers 6 8 and 10 MBPS/UTP combination adapter card on the other 7 computers. You accept the default settings for the network adapter card and finish installing the network adapter card. All computers are connected to 10/100 switch that has category 5 UTP cabling. After installation you find that computer 6 and 8 can communicate with each other. You want all 9 computers on your network to be able to communicate with each other. What should you do?（）A、Configure the 10/100 switch to transfer only at the 100 MBPS rate.B、Configure 10/100 MBPS network adapter card to switch all the computers at 10 MBPS rate.C、Change the combination network adapter card to use the BNC transceiver setting.D、Change the combination network adapter card to use the UTP transceiver setting.

查看答案

考题 You are a network administrator for your company. The company has a main office and a branch office. The branch office has a cable modem connection to the Internet and uses a virtual private network (VPN) connection to access resources on the main office network. The cable modem is connected to a Windows XP Professional computer named Pro1. You configure Internet Connection Sharing (ICS) on Pro1 to allow users in the branch office to use the VPN connection. ICS sets the network adapter to use the IP address 192.168.0.1. Several sales representatives in the branch office use wireless network adapters to share files between their client computers. They need access to the VPN connection to upload sales reports to the main office. You install a wireless network adapter in Pro1 and configure it with the appropriate settings for the wireless LAN. The sales representatives who use the wireless LAN report that they cannot access the VPN connection. However, they are able to connect to resources in the branch office. Users on the wired network do not report any connectivity problems. The sales representatives need to be able to access the VPN. What should you do?（） A、Configure the wireless network connection on Pro1 so that it has an IP address of 192. 168. 0. 2.B、Disable and then re-enable Internet Connection Sharing (ICS) on Pro1.C、Create a network bridge between the wired and wireless connections on Pro1. D、Clear the Allow other network users to control or disable the shared Internet connection check box in the advanced properties of the VPN connection.

查看答案

考题 You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.

查看答案

考题单选题You share your portable computer with a co-worker. You use separate user accounts to log on. A wireless network is available to you and your co-worker. You need to prevent your co-worker from modifying your wireless network profile. What should you do？（）A Disable the Connect even if the network is not broadcasting option.B In the Network and Sharing Center window， click the Diagnose and repair option.C Set the default wireless profile type to the Use all-users only profile （recommended） option. Recreate the wireless network.D Set the default wireless profile type to the Use all-users and per-user profiles option. Recreate the wireless network by using the Save this network for me only option.

查看答案

考题单选题You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）A Set the driver signing option to block.B Set the driver signing option to ignore.C In the computer’s BIOS， reserve an unused IRQ for ISA devices.D In the Device Manager， configure the second ISA network adapter to use an unused IRQ.

查看答案

考题多选题Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only when you are traveling. You need to configure the network adapter profile settings to ensure that the computer discovers other network devices only when you are at home. Which two actions should you perform？（）AWhen you configure access to the wired network at home， set the wired network adapter location type to Public.BWhen you configure access to the wired network at home， set the wired network adapter location type to Private.CWhen you configure access to the public wireless access points， set the wireless network adapter location type to Public.DWhen you configure access to the public wireless access points， set the wireless network adapter location type to Private.

查看答案

考题单选题Your computer connects to both an ad hoc wireless network and a wired network. You need to allow other wireless clients to access the wired network. What should you do？（）A Set the security type to the No authentication （Open） option.B Configure the wired and wireless network adapters as a network bridge.C Modify the wireless network profile type to the Use all-user profiles only （recommended） option.D On each wireless client， set the Service Set Identifier （SSID） for a new wireless network to the name of your wired network adapter.

查看答案

考题单选题You are the network administrator for passguide.com. Which device will you install in your computer to make wireless connections you and a network?（）A Wireless routerB HubC RepeaterD Wireless network adapter

查看答案

考题多选题You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）ARestart the computer in the docking station.BRun the Add/Remove Hardware wizard.CUse Device Manager to scan for hardware changes.DCopy the network adapter driver to the Winnt/Driver Cache/i386 folder.EInstall the new network adapter driver.

查看答案

考题单选题Your network contains a wired network and a wireless network. Users report that they experience intermittent problems accessing network resources when they connect to the internal wireless network. You discover that an unsecured rogue wireless access point uses the same Service Set Identifier (SSID) as the internal wireless network. You need to ensure that the users only connect to the internal wireless network. What should you do?（）A Configure a Windows Connect Now Group Policy.B Configure a Wireless Network (IEEE 802.11) Policy.C Delete the rogue network from the Network and Sharing Center on each computer.D Create a Connection Manager Administration Kit (CMAK) profile and deploy it to all users.

查看答案

考题单选题Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）A Configure a different TCP/IP addressB Enable DHCP in the TCP/IP propertiesC Enable DNS in the TCP/IP propertiesD Configure the network adapter to run at 100 Mbps onlyE Replace the network adapter.

查看答案

考题单选题You install a new hardware router that provides wireless network connectivity between your computer and the Internet. You connect to the router by using a wireless network adapter. Your computer is able to access the Internet but is unable to discover other computers in the local wireless network. You need to configure the wireless connection to allow your computer to discover other computers. What should you do？（）A Configure the network category of your wireless network connection to Private.B Configure the network category of your wireless network connection to Public.C Configure the TCP/IP packet filtering on the wireless network connection.D Configure the wireless network connection with the appropriate authentication to the router.

查看答案

网友您好， 请在下方输入框内输入要搜索的题目：

网友您好，请在下方输入框内输入要搜索的题目：