网友您好, 请在下方输入框内输入要搜索的题目:

题目内容 (请给出正确答案)
单选题
Which one of these class maps was configured to match traffic for CS5?()
A

CIS 1# show class-map forward Class map match-all forward ( id 3) Match ip dscp 18

B

CIS1#show access-map block Class map match-all block (id 4) Match ip dscp 43

C

CIS1# show class-map real-time Class map match-all block (id 5) Match ip dscp 16

D

CIS 1# show class-map pass Class map match-all real-time (id 2) Match ip dscp 40


参考答案

参考解析
解析: 暂无解析
更多 “单选题Which one of these class maps was configured to match traffic for CS5?()A CIS 1# show class-map forward Class map match-all forward ( id 3) Match ip dscp 18B CIS1#show access-map block Class map match-all block (id 4) Match ip dscp 43C CIS1# show class-map real-time Class map match-all block (id 5) Match ip dscp 16D CIS 1# show class-map pass Class map match-all real-time (id 2) Match ip dscp 40” 相关考题
考题 Router R1 refers to route - map fred when redistributing from EIGRP into OSPF. The entire route - map is listed next. Which of the following answers must be true based on the configuration as shown?()route - map fred deny 10match ip address oneroute - map fred deny 20match ip address tworoute - map fred permit 100A. The third route map clause will allow any routes not already filtered by the first two clausesB. R outes permitted by ACL two will be redistributedC. Routes denied by ACL one will be redistributedD. All routes will be filtereD

考题 A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C. Which configuration on Router B will achieve the desired effect?() A.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface e0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 1 72.16.14.4B.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface s0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.3C.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface e0 ip polic y route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.2D.access -list 1 deny 172.16.10.0 0.0.0.255 ! interface s0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.2

考题 Acme Nutrition manufactures a wide variety of vitamin supplements. It has a single manufacturing facility with 3 regional warehouses and 16 district sales offices. Currently the manufacturing facility requires 210 IP addresses; each warehouse requires 51 IP addresses; each district sales office requires 11 IP addresses; and the IP WAN requires 38 IP addresses. if Acme Nutrition plans for 20 percent growth in facilities, how many Class C subnets will the district sales offices require?()A. 19 (3 from the warehouse range and 16 from a separate Class C address)B. 19 (3 from the warehouse block, 15 from a separate Class C block and 1 from the IP WAN block)C. 20 (4 from the warehouse range,15 from a separate Class C block and 1 from the IP WAN block)D. 16 (3 from the warehouse range and 13 from a separate Class C address)

考题 VLAN maps have been configured on switch R1.  Which of the following actions are taken in a  VLAN map that does not contain a match clause?  ()A、 Implicit deny feature at end of list.B、 Implicit deny feature at start of list.C、 Implicit forward feature at end of listD、 Implicit forward feature at start of list.

考题 CLASS-MAP match-all XXX 其中match-all表示什么意思?

考题 Which three configuration tasks are required to successfully deploy NBAR to recognize TCP and UDP stateful protocols? ()A、over leased lines, use the multilink ppp command to reduce latency and jitter, and to create Distributed Link Fragmentation and interleavingB、use the service-policy command to attach a traffic flow to an interface on the routerC、use the ip rsvp bandwidth command to set a strict upper limit on the bandwidth NBAR uses, and to guarantee admission of any flowsD、use the policy-map command to define one or more QoS policies (such as shaping, policing, and so on) to apply to traffic defined by a class mapE、use the random-detect dscp command to modify the default minimum and maximum thresholds for the DSCP valueF、use the class-map command to define one or more traffic classes by specifying the criteria by which traffic is classified

考题 The administrator wants to verify the current state of the OSPF database loading process. Which show command should the administrator use?()A、show ip ospf [process - id] interfaceB、show ip ospf neighborC、show ip ospf [process - id]D、show ip ospf [process - id area - id] database

考题 给出一段配置问你使用的是什么技术? 简要配置如下: Class-map match-all image Match protocol http www.cisco.com

考题 Which three configuration tasks are required to successfully deploy NBAR to recognize TCP and UDP stateful protocols?()A、Over leased lines,use the multilink ppp command to reduce latency and jitter,and to create Distributed Link Fragmentation and interleaving.B、Use the service-policy command to attach a traffic flow to an interface on the router.C、Use the ip rsvp bandwidth command to set a strict upper limit on the bandwidth NBAR uses,and toguarantee admission of any flows.D、Use the policy-map command to define one or more QoS policies (such as shaping,policing,and so on) to apply to traffic defined by a class map.E、Use the random-detect dscp command to modify the default minimum and maximum thresholds for the DSCP value.F、Use the class-map command to define one or more traffic classes by specifying the criteria by which traffic is classified.

考题 ASA/PIXversion 7.0 introduced ModularPolicyFramework (MPF) as anextensible wayto classify traffic,and then apply policies (or actions) to that traffic. MPF at aminimum requires which three commands?()A、 http-map, tcp-map, class-mapB、 class-map, tcp-map, policy-mapC、 class-map, policy-map, service-mapD、 class-map, service-policy, policy-map

考题 Which one of these class maps was configured to match traffic for CS5?()A、CIS 1# show class-map forward Class map match-all forward ( id 3) Match ip dscp 18B、CIS1#show access-map block Class map match-all block (id 4) Match ip dscp 43C、CIS1# show class-map real-time Class map match-all block (id 5) Match ip dscp 16D、CIS 1# show class-map pass Class map match-all real-time (id 2) Match ip dscp 40

考题 What are the steps for configuring stateful NBAR for dynamic protocols? ()A、use the command ip nbar protocol-discovery to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interfaceB、use the command match protocol rtp to allow identification of real-time audio and video traffic. Use the command ip nbar port-map to extend the NBAR functionality for well-known protocols to new port numbersC、use the command match protocol to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interfaceD、configure a traffic class. Configure a traffic policy. Attach the traffic policy to an interface. E、configure video streaming. Configure audio streaming. Attach the codec to an interface

考题 路由器的部分配置如下:  Class-map match-any GOLD  match ip precedence ef  class-map match-any SILVER  Match ip dscp af31  Policy-map Branch  Class GOLD  Priority percent 20  Class SILVER  bandwidth percent 15  random-detect dscp-based  interface Serial0/1  description PPP link to BRANCH bandwidth 1536  ip address 10.200.40.1 255.255.255.252  encapsulation ppp  路由器配置VOICE数据流到优先级队列中,但发现并没有起到作用,可能什么原因?()A、WRED在VOICE队列中没有配置B、policy map 需要应用到接口上C、VOICE 应该映射到不同的DSCP 值D、应该配置CQ,LLQ不能用的VOICE数据流中

考题 Router R1 refers to route - map fred when redistributing from EIGRP into OSPF. The entire route - map is listed next. Which of the following answers must be true based on the configuration as shown?() route - map fred deny 10 match ip address one route - map fred deny 20 match ip address two route - map fred permit 100A、The third route map clause will allow any routes not already filtered by the first two clausesB、R outes permitted by ACL "two" will be redistributedC、Routes denied by ACL "one" will be redistributedD、All routes will be filtereD

考题 What accurately describes the usage of a Cisco AutoQoS command?()A、on Catalyst switches, the show auto discovery qos command is used to display the data collected during the Auto-Discovery phaseB、on Catalyst switches, the show auto qos command is used to display packet statistics of all classes that are configured for all service policiesC、on Cisco routers, the show mls qos maps command is used to verify the CoS-to-DSCP maps for egress packet queuingD、on Cisco routers, the show auto qos command is used to display the AutoQoS interface templates, policy maps, class maps, and ACLs

考题 问答题给出一段配置问你使用的是什么技术? 简要配置如下: Class-map match-all image Match protocol http www.cisco.com

考题 问答题CLASS-MAP match-all XXX 其中match-all表示什么意思?

考题 单选题Acme Nutrition manufactures a wide variety of vitamin supplements. It has a single manufacturing facility with 3 regional warehouses and 16 district sales offices. Currently the manufacturing facility requires 210 IP addresses; each warehouse requires 51 IP addresses; each district sales office requires 11 IP addresses; and the IP WAN requires 38 IP addresses. if Acme Nutrition plans for 20 percent growth in facilities, how many Class C subnets will the district sales offices require?()A 19 (3 from the warehouse range and 16 from a separate Class C address)B 19 (3 from the warehouse block, 15 from a separate Class C block and 1 from the IP WAN block)C 20 (4 from the warehouse range,15 from a separate Class C block and 1 from the IP WAN block)D 16 (3 from the warehouse range and 13 from a separate Class C address)

考题 单选题There ______ a basketball match between Class One and Class Three this afternoon.A is going to beB will haveC are going to beD is going to have

考题 单选题路由器的部分配置如下:  Class-map match-any GOLD  match ip precedence ef  class-map match-any SILVER  Match ip dscp af31  Policy-map Branch  Class GOLD  Priority percent 20  Class SILVER  bandwidth percent 15  random-detect dscp-based  interface Serial0/1  description PPP link to BRANCH bandwidth 1536  ip address 10.200.40.1 255.255.255.252  encapsulation ppp  路由器配置VOICE数据流到优先级队列中,但发现并没有起到作用,可能什么原因?()A WRED在VOICE队列中没有配置B policy map 需要应用到接口上C VOICE 应该映射到不同的DSCP 值D 应该配置CQ,LLQ不能用的VOICE数据流中

考题 单选题Acme Nutrition manufactures a wide variety of vitamin supplements. It has a single manufacturing facility with 3 regional warehouses and 16 district sales offices. Currently the manufacturing facilityrequires 210 IP addresses; each warehouse requires 51 IP addresses; each district sales officerequires 11 IP addresses; and the IP WAN requires 38 IP addresses. if Acme Nutrition plans for20 percent growth in facilities, how many Class C subnets will the district sales offices require?()A  19 (3 from the warehouse range and 16 from a separate Class C address)B  19 (3 from the warehouse block, 15 from a separate Class C block and 1 from the IP WAN block)C  20 (4 from the warehouse range,15 from a separate Class C block and 1 from the IP WAN block)D  16 (3 from the warehouse range and 13 from a separate Class C address)

考题 单选题ASA/PIXversion 7.0 introduced ModularPolicyFramework (MPF) as anextensible wayto classify traffic,and then apply policies (or actions) to that traffic. MPF at aminimum requires which three commands?()A  http-map, tcp-map, class-mapB  class-map, tcp-map, policy-mapC  class-map, policy-map, service-mapD  class-map, service-policy, policy-map

考题 单选题What are the steps for configuring stateful NBAR for dynamic protocols? ()A use the command ip nbar protocol-discovery to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interfaceB use the command match protocol rtp to allow identification of real-time audio and video traffic. Use the command ip nbar port-map to extend the NBAR functionality for well-known protocols to new port numbersC use the command match protocol to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interfaceD configure a traffic class. Configure a traffic policy. Attach the traffic policy to an interface. E configure video streaming. Configure audio streaming. Attach the codec to an interface

考题 单选题Router R1 refers to route - map fred when redistributing from EIGRP into OSPF. The entire route - map is listed next. Which of the following answers must be true based on the configuration as shown?() route - map fred deny 10 match ip address one route - map fred deny 20 match ip address two route - map fred permit 100A The third route map clause will allow any routes not already filtered by the first two clausesB R outes permitted by ACL two will be redistributedC Routes denied by ACL one will be redistributedD All routes will be filtereD

考题 单选题What are the steps for configuring stateful NBAR for dynamic protocols?()A Use the command ip nbar protocol-discovery to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface.B Use the command match protocol rtp to allow identification of real-time audio and video traffic. Use thecommand ip nbar port-map to extend the NBAR functionality for well-known protocols to new port numbers.C Use the command match protocol to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface.D Configure a traffic class. Configure a traffic policy. Attach the traffic policy to an interface.E Configure video streaming. Configure audio streaming. Attach the codec to an interface.

考题 单选题What accurately describes the usage of a Cisco AutoQoS command?()A on Catalyst switches, the show auto discovery qos command is used to display the data collected during the Auto-Discovery phaseB on Catalyst switches, the show auto qos command is used to display packet statistics of all classes that are configured for all service policiesC on Cisco routers, the show mls qos maps command is used to verify the CoS-to-DSCP maps for egress packet queuingD on Cisco routers, the show auto qos command is used to display the AutoQoS interface templates, policy maps, class maps, and ACLs

考题 单选题VLAN maps have been configured on switch R1.  Which of the following actions are taken in a  VLAN map that does not contain a match clause?  ()A  Implicit deny feature at end of list.B  Implicit deny feature at start of list.C  Implicit forward feature at end of listD  Implicit forward feature at start of list.