单选题Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）A Reverse ARPB Full duplex on the fiber linkC PoED 802.1q trunking

考题 A new switch is installed in the Ezonexam network. This switch is to be configured so that VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur? (Choose all that apply).A. The switch that will share the VLAN information must be in the VTP Server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be configured to use the same VTP version.E. The switches must be configured to use the same STP version.F. The switches must be configured to use the same type of ID tagging.G. The switches must be connected over VLAN trunks.

查看答案

考题 A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur?（）A. The switch that will share the VLAN information must be in the VTP Server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be configured to use the same VTP version.E. The switches must be configured to use the same STP version.F. The switches must be configured to use the same type of ID tagging.G. The switches must be connected over VLAN trunks.

查看答案

考题 An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network.What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）A. The switch that will share its VLAN configuration must be in VTP server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be connected over VLAN trunks.E. The switches must be configured to use the same STP version.F. The switches must have VTP pruning activated.

查看答案

考题 Which three statements are typical characteristics of VLAN arrangements?() A. A new switch has no VLANs configured.B. Connectivity between VLANs requires a Layer 3 device.C. VLANs typically decrease the number of collision domains.D. Each VLAN uses a separate address space.E. A switch maintains a separate bridging table for each VLAN.F. VLANs cannot span multiple switches.

查看答案

考题 Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）A.The access link needs to be configured in multiple VLANs.B.The link between the switches is configured in the wrong VLAN.C.The link between the switches needs to be configured as a trunk.D.VTP is not configured to carry VLAN information between the switches.E.Switch IP addresses must be configured in order for traffic to be forwarded between the switches

查看答案

考题 When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link()。 A.By default, all defined VLANs are allowed on the trunk.B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.D.Each single VLAN, or VLAN range, must be specified with the vlan database command.

查看答案

考题 On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）A.a router with subinterfaces configured on the physical interface that is connected to the switchB.a router with an IP address on the physical interface connected to the switchC.a switch with an access link that is configured between the switchesD.a switch with a trunk link that is configured between the switches

查看答案

考题 Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs()。 A.a switch with a trunk link that is configured between the switchesB.a router with an IP address on the physical interface that is connected to the switchC.a switch with an access link that is configured between the switchesD.a router with subinterfaces configured on the physical interface that is connected to the switch

查看答案

考题 Which MST configuration statement is correct？（）A、 MST configurations can be propagated to other switches using VTP.B、 After MST is configured on a Switch， PVST+ operations will also be enabled by default.C、 MST configurations must be manually configured on each switch within the MST region.D、 MST configurations only need to be manually configured on the Root Bridge.E、 MST configurations are entered using the VLAN Database mode on Cisco Catalyst switches.

查看答案

考题 Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs（）。A、a switch with a trunk link that is configured between the switchesB、a router with an IP address on the physical interface that is connected to the switchC、a switch with an access link that is configured between the switchesD、a router with subinterfaces configured on the physical interface that is connected to the switch

查看答案

考题 Which two statements are true about voice VLANs？（）A、Voice VLANs are only used when connecting an IP phone and a host to distinct switch portsB、Access ports that are configured with voice VLANs will always trust the CoS that is received from IP phonesC、Access ports that are configured with voice VLANs may or may not override the CoS value that is received from an IP phoneD、Voice VLANs are configured using the switchport voice vlan vlan-ID interface configuration commandE、Voice VLANs provide a trunking interface between an IP phone and an access port on a switch to allow traffic from multiple devices that are connected to the portF、Enabling Voice VLAN on a switch port will automatically configure the port to trust the incoming CoS markings

查看答案

考题 An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？（）A、The switch must be configured with an IP address,subnet mask,and default gateway.B、The switch must be connected to a router over a VLAN trunk.C、The switch must be reachable through a port connected to its management VLAN.D、The switch console port must be connected to the Ethernet LAN.E、The switch management VLAN must be created and have a membership of at least one switch port.F、The switch must be fully configured as an SNMP agent.

查看答案

考题 An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）A、The switch must be configured with an IP address, subnet mask, and default gateway.B、The switch must be connected to a router over a VLAN trunk.C、The switch must be reachable through a port connected to its management VLAN.D、The switch console port must be connected to the Ethernet LAN.E、The switch management VLAN must be created and have a membership of at least one switch

查看答案

考题 A switch port on TK1 is being configured to support 802.1Q trunking. Which of the following are true about 802.1Q trunking？（）A、Both switches must be in the same VTP domain.B、The encapsulation type of both ends of the trunk does not have to match.C、The native VLAN on both ends of the trunk must be VLAN 1.D、802.1Q trunking can only be configured on a Layer 2 port.E、In 802.1Q trunking， all VLAN packets are tagged on the trunk link， except the native VLAN.

查看答案

考题 On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）A、a router with subinterfaces configured on the physical interface that is connected to the switchB、a router with an IP address on the physical interface connected to the switchC、a switch with an access link that is configured between the switchesD、a switch with a trunk link that is configured between the switches

查看答案

考题 Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）A、Reverse ARPB、Full duplex on the fiber linkC、PoED、802.1q trunking

查看答案

考题单选题You have just created a new VLAN on your network. What is one step that you should include in your VLAN based implementation and verification plan？（）A Verify that different native VLANs exist between two switches for security purposes.B Verify that the VLAN was added on all switches with the use of the show vlan command. C Verify that the switch is configured to allow for trunking on the switch ports.D Verify that each switch port has the correct IP address space assigned to it for the new VLAN.

查看答案

考题单选题Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）A The access link needs to be configured in multiple VLANs.B The link between the switches is configured in the wrong VLAN.C The link between the switches needs to be configured as a trunk.D VTP is not configured to carry VLAN information between the switches.E Switch IP addresses must be configured in order for traffic to be forwarded between the switches

查看答案

考题多选题An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）AThe switch must be configured with an IP address, subnet mask, and default gateway.BThe switch must be connected to a router over a VLAN trunk.CThe switch must be reachable through a port connected to its management VLAN.DThe switch console port must be connected to the Ethernet LAN.EThe switch management VLAN must be created and have a membership of at least one switch

查看答案

考题多选题Which two statements are true about voice VLANs？（）AVoice VLANs are only used when connecting an IP phone and a host to distinct switch portsBAccess ports that are configured with voice VLANs will always trust the CoS that is received from IP phonesCAccess ports that are configured with voice VLANs may or may not override the CoS value that is received from an IP phoneDVoice VLANs are configured using the switchport voice vlan vlan-ID interface configuration commandEVoice VLANs provide a trunking interface between an IP phone and an access port on a switch to allow traffic from multiple devices that are connected to the portFEnabling Voice VLAN on a switch port will automatically configure the port to trust the incoming CoS markings

查看答案

考题单选题When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）A By default， all defined VLANs are allowed on the trunk.B Each single VLAN， or VLAN range， must be specified with the switchport mode command.C Each single VLAN， or VLAN range， must be specified with the vtp domain command.D Each single VLAN， or VLAN range， must be specified with the vlan database command.

查看答案

考题多选题An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？（）AThe switch must be configured with an IP address,subnet mask,and default gateway.BThe switch must be connected to a router over a VLAN trunk.CThe switch must be reachable through a port connected to its management VLAN.DThe switch console port must be connected to the Ethernet LAN.EThe switch management VLAN must be created and have a membership of at least one switch port.FThe switch must be fully configured as an SNMP agent.

查看答案

考题单选题On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）A a router with subinterfaces configured on the physical interface that is connected to the switchB a router with an IP address on the physical interface connected to the switchC a switch with an access link that is configured between the switchesD a switch with a trunk link that is configured between the switches

查看答案

考题单选题Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs（）。A a switch with a trunk link that is configured between the switchesB a router with an IP address on the physical interface that is connected to the switchC a switch with an access link that is configured between the switchesD a router with subinterfaces configured on the physical interface that is connected to the switch

查看答案

考题单选题A switch port on TK1 is being configured to support 802.1Q trunking. Which of the following are true about 802.1Q trunking？（）A Both switches must be in the same VTP domain.B The encapsulation type of both ends of the trunk does not have to match.C The native VLAN on both ends of the trunk must be VLAN 1.D 802.1Q trunking can only be configured on a Layer 2 port.E In 802.1Q trunking， all VLAN packets are tagged on the trunk link， except the native VLAN.

查看答案

考题多选题An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）AThe switch that will share its VLAN configuration must be in VTP server mode.BThe switches must be in the same VTP domain.CThe switch that will share the VLAN information must be configured as the root bridge.DThe switches must be connected over VLAN trunks.EThe switches must be configured to use the same STP version.FThe switches must have VTP pruning activated.

查看答案

考题单选题Which MST configuration statement is correct？（）A MST configurations can be propagated to other switches using VTP.B After MST is configured on a Switch， PVST+ operations will also be enabled by default.C MST configurations must be manually configured on each switch within the MST region.D MST configurations only need to be manually configured on the Root Bridge.E MST configurations are entered using the VLAN Database mode on Cisco Catalyst switches.

查看答案

考题单选题Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）A Reverse ARPB Full duplex on the fiber linkC PoED 802.1q trunking

查看答案

网友您好， 请在下方输入框内输入要搜索的题目：

网友您好，请在下方输入框内输入要搜索的题目：